Models
>
RS2630SW/XAA
RS2630SW/XAA Samsung Refrigerator - Overview
Sections of the RS2630SW/XAA
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
Ice Cube Tray
PartSelect #: PS4149221
Manufacturer #: DA63-02284B
The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a fla...
$70.43
In Stock
Cover - Sensor;AD,PP,T1.0,
PartSelect #: PS4149137
Manufacturer #: DA63-02183A
This sensor cover, also known as the ice maker thermostat cover, is a genuine OEM replacement part for Samsung refrigerators. It is made of durable white plastic and has measurements of approximately ...
$7.80
In Stock
Condenser Fan Motor with Bracket
PartSelect #: PS4170861
Manufacturer #: DA97-01949A
This fan motor is compatible with most frost-free Samsung refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the ...
$160.51
In Stock
LEVER DISPENSER-ICE;AD,A
PartSelect #: PS4156670
Manufacturer #: DA66-00294A
This is a refrigerator ice dispenser lever. It is clear and made entirely out of plastic. The function of the ice dispenser lever is to dispense ice when the lever is pushed. If the lever is cracked o...
No Longer Available
Questions And Answers for RS2630SW/XAA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the RS2630SW/XAA
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lever Dispenser-Ice Was Broken.
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out.
... Read more
Secondary note * be mindful during reassembly to not put pressure on the water dispenser or have a glass handy. :)
Read less
Parts Used:
-
RUSSELL from LAS VEGAS, NV
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice tray had cracked and broken. The water is still not filling up my ice tray.
The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.
*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
Parts Used:
-
Timothy from SALISBURY, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
4 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!