EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

RK964GP1 Hotpoint Microwave Oven Combo - Overview

Diagrams for RK964GP1

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB44K5013
$75.16
In Stock
Bake Element
★★★★★
★★★★★
(45)
Part #WB44K5013
This bake element is used in ranges and located at the bottom of the oven. The bake element supplies heat for baking. If your symptoms include: your oven is not heating evenly, not starting, or the heating is not consistent, then replacing the element can be the solution. Remove two retaining screws, make sure to disconnect the two connecters at each end of the element, and replace with the new one. Before starting this replacement, make sure the range is unplugged from the power source or shut off from the house circuit breaker. The tool needed is a Phillips screwdriver.
Broil Element - 240V – Part Number: WB44K5009
$78.92
In Stock
Broil Element - 240V
★★★★★
★★★★★
(22)
Part #WB44K5009
This OEM-sourced broil element with push-on terminals is located on the roof of your oven cavity, providing heat from above to cook and heat your food. It requires a 240-volt power supply to function properly. The element measures 13 1/4 inches in width and has a length of 15 7/8 inches from the mounting bracket to the back. If you are experiencing issues like uneven broiling or lack of heat, it is likely that the broil element is faulty and needs replacement. Before starting the replacement process, ensure that you turn off the oven at the breaker panel and let it cool down. To carry out the repair, you will need a flathead screwdriver, nut driver, and pliers. Begin by removing the oven door and racks. Then, unscrew the mounting screws that hold the old element in place and disconnect its wiring. Carefully pull out the old element from the appliance. When installing the new element, slide the wire contacts onto the terminals, insert it into the designated slot, and secure it with its fasteners. The top of the element is held in place by fork-like support clips, which are sold separately from the element itself.
Meat Probe Thermistor – Part Number: WB20T10024
$64.55
In Stock
Meat Probe Thermistor
★★★★★
★★★★★
(4)
Part #WB20T10024
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
Light Cover – Part Number: WB36X192
$26.39
In Stock
Light Cover
★★★★★
★★★★★
(10)
Part #WB36X192
This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it needs to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.
Oven Rack – Part Number: WB48T10093
$85.52
In Stock
Oven Rack
★★★★★
★★★★★
(6)
Part #WB48T10093
Sold individually.
Door Lock and Switch Assembly – Part Number: WB49T10020
$158.94
In Stock
Door Handle – Part Number: WB15X5163
No Longer Available
Door Handle
Part #WB15X5163
Does not include handle insert/trim.
Limit Switch – Part Number: WB24K5033
$65.81
Special Order
Limit Switch
★★★★★
★★★★★
(1)
Part #WB24K5033
This part acts like a safety thermostat on the appliance. Once it reaches a certain temperature it will shut off the heat source (element) to make sure the temperature doesn't go any higher.
Magnetron – Part Number: WB27X10249
$263.32
Special Order
Magnetron
Part #WB27X10249
This part is used to generate microwave energy/heat.
JAMB SWITCH – Part Number: WB24K5061
No Longer Available
JAMB SWITCH
Part #WB24K5061
REFLECTOR – Part Number: WB34K5187
No Longer Available
REFLECTOR
Part #WB34K5187
TRANS-H.V – Part Number: WB27X10189
No Longer Available
TRANS-H.V
Part #WB27X10189

Common Symptoms of the RK964GP1

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
bake element shorted out, sparking like a sparkler
89 of 99 people found this instruction helpful.
  • Carl from Wynnewood, PA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
first, made sure circuit breaker was off
second, used nut driver to remove 2 screws on old element, pulled it from the back of the oven
third, removed 2 wires from old element (spade connectors)
fourth, connected new element and pushed back into oven.
fifth, reinstalled 2 screws securing new element

this was all done by my 15 yr old son under my supervision.
Was this helpful?
Thank you for voting!
The broiler element caught fire and burned out while I was broiling a steak.
67 of 75 people found this instruction helpful.
  • Dianne from Rockville, MD
  • Easy
  • Less than 15 mins
  • Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches, but I had not turned off the power.
So, I shorted out one of the wires. Then I turned off the power but was afraid to go any farther.
An appliance repairman was at my house that day fixing my dryer seal. He was able to pu ll the wires through the insulation successfully and install the broiler element. He did not charge me any extra for this little extra job. But I learned my lesson. Cut the power before you begin! He told me that I could have wound up with a much bigger repair if the short had been in the wire that is connected to the control panel of the oven. I was very lucky!
Was this helpful?
Thank you for voting!
Top broiler element went out
39 of 43 people found this instruction helpful.
  • Kim from Garland, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
FIRST MAKE SURE THE OVEN IS OFF!!!! I chose to shut it off at the breaker panel. Remove the two screws that attaches the broiler element to the oven. Gently pull it out. Unplug the two cable wires that are attached. Replace it and install the same way.
Was this helpful?
Thank you for voting!