RH556*03 General Electric Range - Parts

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

This 6-inch surface element provides heat for boiling, frying, and simmering on an electric range. Its 3-wire, tilt-lock design runs on 240 volts and produces about 1,325 watts. Replace it if it does not heat, heats unevenly, or has burned or broken areas. Before ordering, inspect the control switch, wire ends, and mounting parts. Confirm...Read more the size, voltage, wattage, and fit with the full appliance model. Turn off the correct breaker and verify that power is off before service. Let the element cool and secure each wire before testing.

The depth of the terminals is 2.5 inches, and the screw-in terminals are 1.5 inches apart.

This oven broil element has push on terminals.

The length of this thermostat's capillary is 62 inches.