My Orders
- Home
- RH2200RAW00
- Instructions
RH2200RAW00 Roper Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scratches in Surface
83 of 227 people
found this instruction helpful.
-
Michelle from Richardson, TX
- Really Easy
- Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
freezer wasn't cooling
11 of 14 people
found this instruction helpful.
-
James from Paden City, WV
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Unpluged the freezer
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut ... Read more and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut ... Read more and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Read less
Was this helpful?
Thank you for voting!