RGJ534GEP1 Hotpoint Wall Oven - Overview

Diagrams for RGJ534GEP1

See every part. Know exactly what you need.

Parts for the RGJ534GEP1

Oven Door Seal

★★★★★

(2)

Part #WB32K5050

This door seal goes around the oven body to help seal in the heat of the oven.

Electronic Clock Control Kit

Part #WB27T10327

This kit is equipped with the oven control, faceplate and any necessary installation wires. This part may look different from the original, but should still function the same. The wiring is different, and is recommended to be installed by a repair person.

$208.36

CONTROL VALVE

★★★★★

(1)

Part #WB21K5009

$59.47

Broil Burner Baffle

★★★★★

(2)

Part #WB34X38846

$24.09

Rocker Switch

Part #WB24K5035

HINGE OV Door RT

Part #WB14K5006

$37.91

DOOR INSULATION

Part #WB35K5054

$99.25

HINGE OV Door LT

Part #WB14K5007

$53.20

Control Panel End Cap - Black - Right Side

Part #WB36K5129

$305.84

Oven Bottom Panel

Part #WB63K5097

$78.77

OVERLAY PNL Lower (BK)

Part #WB56K10048

Control Panel End Cap - Black - Left Side

Part #WB36K5128

Questions And Answers for RGJ534GEP1

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Gary - For model number RGJ534GEP1

November 30, 2025

Oven gives error F2 once heated and then shuts down

Hi Gary, thank you for your inquiry. The F2 error on oven indicates that the oven control senses an over-temperature condition, meaning it has either exceeded a safe temperature threshold or it incorrectly believes it has. Ensure the oven's vents are not clogged with grease or debris, which can cause actual overheating. If this is not the case, the temperature sensor, part number PS236043, could be faulty misreading the temperature and causing the issue. Glad to be of help!

$147.53

Oven Sensor

Was this helpful?

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

oven door seal was old and falling apart

56 of 67 people found this instruction helpful.

eric from washington, DC
Really Easy
Less than 15 mins
Screw drivers

at first thought the seal would just slide out and the same for the replacement. when I realized that this was not the case and began to wonder what....? I saw the screws at top and bottom, took them off and voila the inner shell moved forward enough to take out the old, slide in the new, push in, replace the screws and back to a happy w ... Read more

Read less

Was this helpful?

gas valve quit working

1 person found this instruction helpful.

chris from FORT BRAGG, CA
Very Easy
15 - 30 mins
Screw drivers

Very easy, didn't even have to take the oven out of the wall. Will use this site again.

Was this helpful?

the oven seal was dried out and crumbling not safe to use on a gas appliance

1 person found this instruction helpful.

jim from SAVAGE, MN
A Bit Difficult
30 - 60 mins
Screw drivers

From what I was able to find info on I was to take out 5 screws 3 on top and 2 on the bottom then the inner oven box is suppose to pull out a bit to take the old gasket off and put the new onw on the box was so rusty it would not pull out so I was able to get enough of the box out using a large screwdriver the lip of the gasket tucks behi ... Read more

Read less

Was this helpful?