RGBS100DM1BB General Electric Range - Parts

The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to light the oven burner. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, ...Read morethe connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.

Both burners are mounted on the same bracket.

This oven door gasket prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

This metal oven rack provides a stable and durable surface for baking, roasting, and broiling inside your oven. Designed to fit select gas range and oven models, it promotes even heat circulation and airflow around food for consistent cooking results. Constructed from solid 304 stainless steel, the rack resists rust and warping even at hi...Read moregh temperatures, ensuring long-term reliability. Measuring approximately 23.75 inches in length and 16.25 inches in width, it offers ample space for cookware. Many versions feature convenient handles at each end, allowing for easy placement and removal from the oven.

This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should simply screw o...Read moreut, and the new one will screw in. This part is about ¼ of a inch in diameter and is gold in color. It is sold individually and is a genuine OEM part.

Sold Individually.

This knob, or mini valve is a genuine OEM replacement part for your gas range. The knob is black, made of plastic, and allows you to control the heat level on your range. The knob is a very easy part to replace, you simply pull off the existing knob and slide the new one in place.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent cooking results. By directing airflow and preventing hot spots, it helps maintain oven efficiency and performance. Installation is straightfo...Read morerward and can typically be completed with basic tools, making it an essential replacement for restoring your range’s functionality.

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

This igniter comes with the wire harness.