See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven not up to temperature; shuts off before temp set
8 of 9 peoplefound this instruction helpful.
Maurice from Overland Park, KS
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Was this helpful?
Thank you for voting!
Igniter
5 of 6 peoplefound this instruction helpful.
GENE from HEBRON, OH
Difficult
30 - 60 mins
Screw drivers, Socket set
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
Was this helpful?
Thank you for voting!
Oven Igniter DEAD
4 of 5 peoplefound this instruction helpful.
Steve from Flanders, NJ
Really Easy
15 - 30 mins
Screw drivers
First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging. Then just reversed the whole operation. However, it never worked because the "oven/broiler" switch broke. Its time for a new stove. But I would recommend PartsSelect to anybody. Your selection is great, you shipped as
... Read more promised, and the best part was the price.