RGB533BEKB General Electric Range - Parts

This is the replacement left front orifice for your gas range. When your range is operating, gas flows through the orifice to the igniter. This part is the orifice itself as well as the metal holder that holds it in place. If you notice a gas smell when your range is on, you could have a loose or damaged orifice. This part fits the front ...Read moreleft burner in your range, so make sure you are replacing the correct orifice. This is an OEM part sourced from the manufacturer and is sold individually.

This burner cap sits on top of the burner base.

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simp...Read morely pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.

This is a replacement cooktop mounting screw, used to secure the burner. If you are missing that screw on your range, this is the part to replace it. This screw is about a half an inch in length and is sold individually. It is an OEM part sourced directly from the manufacturer.

Size: 10-32 GXTT FLP .595 Sold individually.

This is the replacement thermostat knob for your oven. It is made of black plastic and has temperature settings printed on it. The thermostat knob connects to a shaft on your oven and allows you to turn the oven on and off, adjust the temperature, and use the broil setting. If your old knob is worn, stripped, damaged, or missing, this is ...Read morethe part that will replace it. To replace the thermostat knob, carefully remove it from the shaft and replace it with the new knob. This part is sold individually and is an OEM part sourced directly from the manufacturer.

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent cooking results. By directing airflow and preventing hot spots, it helps maintain oven efficiency and performance. Installation is straightfo...Read morerward and can typically be completed with basic tools, making it an essential replacement for restoring your range’s functionality.

This replacement oven door handle is designed to restore functionality and ease of use to your appliance. Crafted from durable black plastic, it measures approximately 30 inches in length and 1.5 inches in width, providing a secure and comfortable grip. The handle attaches directly to the oven door, allowing for smooth and reliable openin...Read moreg and closing. Ideal for situations where the original handle is broken or missing, this component is sold individually and is sourced directly from the original equipment manufacturer to ensure compatibility and performance. Installation typically involves securing the handle to the existing mounting points on the oven door using standard tools.

This is the replacement front surface burner tube and orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies fuel from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should si...Read moremply screw out, and the new one will screw in. It is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This item no longer comes with the igniter.