RGB518PCH1WH Hotpoint Range - Overview

Diagrams for RGB518PCH1WH

See every part. Know exactly what you need.

Parts for the RGB518PCH1WH

$59.47

Double Burner Assembly

★★★★★

(10)

Part #WB16K10026

Both burners are mounted on the same bracket.

$29.47

GASKET DOOR ASM

★★★★★

(14)

Part #WB35X29720

This oven door gasket prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

$79.26

Oven Rack

★★★★★

(16)

Part #WB48X20249

This metal oven rack provides a stable and durable surface for baking, roasting, and broiling inside your oven. Designed to fit select gas range and oven models, it promotes even heat circulation and airflow around food for consistent cooking results. Constructed from solid 304 stainless steel, the rack resists rust and warping even at hi...Read more

Read less

$18.22

Mini Control Knob

★★★★★

(6)

Part #WB03K10216

This knob, or mini valve is a genuine OEM replacement part for your gas range. The knob is black, made of plastic, and allows you to control the heat level on your range. The knob is a very easy part to replace, you simply pull off the existing knob and slide the new one in place.

$43.18

Broiler Pan - Large

★★★★★

(10)

Part #WB48X10056

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simp...Read more

Read less

$17.28

Range Leg Leveler

★★★★★

(5)

Part #WB02K10182

$96.61

BOTTOM OVEN AND DEFLECTOR ASM

★★★★★

(10)

Part #WB35X37973

This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent cooking results. By directing airflow and preventing hot spots, it helps maintain oven efficiency and performance. Installation is straightfo...Read more

Read less

$16.05

Range Screw

★★★★★

(2)

Part #WB01T10008

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

$29.47

BRACKET ANTI-TIP Assembly

★★★★★

(2)

Part #WB02K10254

$51.61

Burner Grate - Black

★★★★★

(1)

Part #WB31K10015

Sold individually.

$30.53

Natural Gas Orifice

★★★★★

(2)

Part #WB28K10033

Sold individually.

$15.00

Handle Spacer

Part #WB01K10020

This spacer is located between the handle and the outside door panel. They are sold individually, and are usually recommended to be purchased in pairs.

Questions And Answers for RGB518PCH1WH

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Laura - For model number RGB518PCH1WH

January 12, 2020

Oven pilot will light, orifice glows, but the burner will not light. Once/if the oven does get lit, it shuts down repeatedly during baking.

Hi Laura, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. Good luck with your repair.

Was this helpful?

Benjamin - For model number RGB518PCH1WH

August 15, 2023

The oven and stove will not spark at all. I tried a new battery. Gas is flowing; I am able to light a burner with a lighter. Has the spark module gone bad?

Hi Benjamin, thank you for reaching out. It does appear that your range has a damaged spark module, part number PS6447607. We hope that helps!

$59.47

SPARK MODULE

Was this helpful?

Petre - For model number RGB518PCH1WH

May 8, 2026

need two small pipes [one is aluminum] and the second is copper, running from the thermostat to the oven pilot

Hello Petre, thank you for contacting us. The pipes you are looking for are part number PS8754739 and part number PS8767060. Glad to be of assistance!

$64.69

ROUND MANIFOLD PIPE

$50.56

BURNER OVEN Assembly

Was this helpful?

Common Symptoms of the RGB518PCH1WH

How this model fails, and the parts that fix it.

Gas igniter glows, but will not light

Element will not heat

Fixed by
these parts

Show All

Oven not heating evenly

Videos related to models starting with RGB518PCH1WH

Watch our pros, then fix it yourself.

Replacing the Oven Rack

Replacing the Range Leg Leveler

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

My old burners were beyond the point of coming clean and made my stove top look bad.

23 of 30 people found this instruction helpful.

Helen from Flemington, NJ
Easy
Less than 15 mins

My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.

Was this helpful?

Pies Boiled Over And Baked On Oven Bottom

20 of 25 people found this instruction helpful.

Marjorie from Yucca Valley, CA
Really Easy
Less than 15 mins
Screw drivers

Removed the two screws put the heat shield off the old one onto the new one put new bottom in and tightened two screws. Done #38. 69 Cost of part with shipping cost included.

Was this helpful?

Burners were burning the pans and flames coming out at all different angles of the burner

13 of 15 people found this instruction helpful.

ANNE from HICKSVILLE, NY
Easy
15 - 30 mins

The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing th ... Read more

Read less

Was this helpful?