EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

RF724GP1 Hotpoint Range - Overview

Sections of the RF724GP1

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Range Infinite Heat Switch Kit – Part Number: WB21X36771
Range Infinite Heat Switch Kit
★★★★★
★★★★★
(16)
PartSelect #: PS16216966
Manufacturer #: WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
$53.20
  In Stock
Order now and your part arrives by Apr 10
Switch – Part Number: WB24T10147
Switch
★★★★★
★★★★★
(3)
PartSelect #: PS1765837
Manufacturer #: WB24T10147
This light switch is controlled by opening and closing the oven door
$30.53
  In Stock
Order now and your part arrives by Apr 10
Door Lock and Switch Assembly – Part Number: WB49T10020
Door Lock and Switch Assembly
PartSelect #: PS2577623
Manufacturer #: WB49T10020
Enhance the functionality of your GE range with this Oven Door Lock Assembly. Primarily designed to provide additional safety, this component locks the oven door during the self-cleaning cycle, helpin...
$158.94
  In Stock
Order now and your part arrives by Apr 10
Inner Door Glass – Part Number: WB56X1907
Inner Door Glass
PartSelect #: PS252520
Manufacturer #: WB56X1907
  No Longer Available
Exterior Door Glass – Part Number: WB56X1902
Exterior Door Glass
PartSelect #: PS252515
Manufacturer #: WB56X1902
$219.89
  Special Order
DOOR LOCK PLAT – Part Number: WB34K5228
DOOR LOCK PLAT
PartSelect #: PS245083
Manufacturer #: WB34K5228
$75.13
  Special Order
LEVER LOCK – Part Number: WB15K5016
LEVER LOCK
PartSelect #: PS231804
Manufacturer #: WB15K5016
$51.61
  Special Order
LIMIT SWITCH-APPARANCY – Part Number: WB24K5086
LIMIT SWITCH-APPARANCY
PartSelect #: PS236642
Manufacturer #: WB24K5086
  No Longer Available
Main Top - White – Part Number: WB62K5051
Main Top - White
PartSelect #: PS253710
Manufacturer #: WB62K5051
  No Longer Available
GLASS OV Door INNER – Part Number: WB57K5102
GLASS OV Door INNER
PartSelect #: PS252888
Manufacturer #: WB57K5102
  No Longer Available
OV Door HANDLE – Part Number: WB57K5025
OV Door HANDLE
PartSelect #: PS252827
Manufacturer #: WB57K5025
  No Longer Available
INSULATION-BACK & Bottom – Part Number: WB35K5113
INSULATION-BACK & Bottom
PartSelect #: PS245358
Manufacturer #: WB35K5113
$70.95
  Special Order

Questions And Answers for RF724GP1

Be the first to ask our experts a question about this model!

Common Symptoms of the RF724GP1

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Large burner would operate on high setting only.
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
Parts Used:
Range Infinite Heat Switch Kit
  • Ernest from Bellevue, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
22 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Convection oven fan and door light not working
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)

Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two hex head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.

Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Parts Used:
Switch
  • Michael from Albuquerque, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right front burner out.
Ever the optimist, I'd replaced the burner on this relic of another time to no effect. That left the switch. You guys should know that when a burner element goes bad it can take out the switch. I should have put a meter on it. Wehn I looked for a replacement a few months ago there were still factory parts available, but they were $80 or so and I wasn't inclined to risk that on a 40 year old range. I offered to replace the raange for my daughter as a Christmas present but she like this old thing. It was an unusual size with a pan storage compartment on the left. I went on line and found this universal replacement for about $25 delivered. What the heck. I ordered it and it arrived within a week. I pulled the stove out, killed the breaker, pulled the knob off, used a nut driver to take ther rear panel off, two phillips screws under the knob hold the switch in. The terminals on the old switch are in a slightly different order but are clearly marked L1, L2, H1, H2 and P. The P is the power and has a smaller terminal so you can't put it on the wrong one. Just examine the old switch ( it was marked the same way) take off the L1 and put in on the L1 of the new switch and so on, make sure you use the correct knob adapter to fit your old knob and break the switch stem to the correct length. It will break easilly if you hold it with one pliers and break it with another. Screw the new switch in place with he old screws. At this point, I closed the breakers and tested it. It worked fine. I turned the breakers off again. Buttoned it up and slid the stove back into place. 20 minutes tops. Great product. Good for another forty years.
Parts Used:
Range Infinite Heat Switch Kit
  • Larry from Prairie Village, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!