The water in your home can contain impurities that affect its clarity, taste, smell, and safety. Water can contain dirt, rust, chlorine, or water-hardening minerals. These deposits can cause health issues, damage to your refrigerator, and leave your water and ice cloudy and undrinkable. This OEM water filter uses a block of activated carb...Read moreon to filter these pollutants out, giving you healthy, clear, great-tasting water and ice. This filter fits many Samsung refrigerators, and is rated NSF 42 and 53, which certifies that this fridge filter removes pollutants including: chlorine, cysts, asbestos, benzene, sediment, and sand. A good way to judge whether the filter needs to be replaced is when the water flow to the dispenser starts slowing down and there has been no change to the water pressure to the product. There is no bypass needed. Just remove the filter and it will automatically bypass the water filter. It has an easy twist design making the replacement quick and painless with no need for tools or mess. It measures 2.13 inches by 2.13 inches by 8.86 inches and weights 0.56 lbs. Replace every six months.
This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice that your doors open and the mullion either moves freely or is stuck, this hinge needs to be replaced immediately to prevent issues with frost...Read more buildup, energy efficiency and temperature fluctuations. Replacing this hinge is quite simple, and you will only need a flathead and Philips-head screwdriver to do it. First, remove the screw covers from the securing screws for the mullion. Unscrew and remove the securing screws with your Philips-head screwdriver, and then pull the mullion up and out carefully to dislodge it from the fridge door. Near the middle of the mullion, disconnect the wire harness to remove the mullion completely. Remove the hinge cover with a flathead screwdriver to expose the hinge, and then carefully remove and replace the old hinge onto its attaching spring. Then you can simply reassemble the rest of the door assembly, along with the hinge cover and wire harness.
This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area. If you notice that your refrigerator or freezer is noisy, or is not ...Read morecooling like it should, you may need to replace the evaporator fan motor. The base of this part is approximately 3 inches in length and 2 inches in width. The shaft of this part is an additional 2 inches in length.
This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing. Its dimensions are approximately 4-1/2 inches by 12-3/4 inches by 4-1/4 inches, and it can produce about 84 ice cubes within 24 hours. Thi...Read mores genuine OEM assembly is sold separately from the water line and the water inlet valve.
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin th...Read moree repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.
This refrigerator door handle is a genuine OEM replacement part that is designed for Samsung freezers. The silver handle is made from high-strength aluminum alloy and coating. It is attached to the outer panel of the freezer where it allows for easy opening and closing of the freezer door. It has an ergonomic design that allows users to e...Read moreasily grip and pull the door to access the contents of the freezer. It is recommended to replace the handle if it is cracked, broken, unstable, or if its appearance has deteriorated.
Introducing the genuine Samsung Fan Blade Assembly, a premium quality replacement part for your refrigerator. Designed to keep your appliance cool and functioning at optimum levels, this high-quality assembly is user-friendly and equips with all necessary hardware for easy installation. The essence of this assembly becomes evident when yo...Read moreur refrigerator isn't cooling sufficiently, which is usually due to faulty running fan motors or damaged fan blades. This fan blade assembly effectively moves air across the condenser coil, cooling the hot refrigerant before it infiltrates the evaporator. Ensure to safeguard any food that may deteriorate during a power-off scenario and disconnect your refrigerator prior to installing this part. Embrace your Samsung refrigerator with this fan assembly for a smooth, trouble-free functioning.
This genuine OEM door hinge bushing or grommet is installed inside the door panel of your refrigerator. It creates a smooth surface for the door hinge pin to pivot in, preventing door misalignment and ensuring a tight seal to keep your food fresh and your energy bills low. You will find it within the hinge assembly, usually at the top or ...Read morebottom of the refrigerator door where it connects to the main body of the fridge. If the bushing is broken, you might notice the fridge door is harder to open or close, makes unusual noises during operation, or appears misaligned. Since this replacement part is sold individually, make sure to confirm how many your model will need before making your purchase.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara - For model number RF4287HARS/XAA
March 29, 2026
The handle on the right side of freezer drawer has come off on one side. I can pop it back but it is not usable because if pulled on pops right off?
Hi Barbara, thank you for reaching out. Based on our understanding, we would suggest checking the door handle latch, part number PS4145048. You may need to replace it to fix the issue. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water filter needed to be changed.
25 of 55 peoplefound this instruction helpful.
Arlena from CHICAGO, IL
Very Easy
Less than 15 mins
Pliers
unlock filter with pliers with a turn to the right, pull out and replace filter, Turner new filter to the left until it click in.
Was this helpful?
Thank you for voting!
Ice maker not making ice
10 of 17 peoplefound this instruction helpful.
Alton from LITHONIA, GA
Very Easy
Less than 15 mins
Screw drivers
Unscrewed 1 screw, removed panel, disconnected old icemaker and removed it, Added new icemaker, reconnected, replaced panel, replaced screw, & reset new icemaker. Started making ice almost immediately. Threw out entire first load of ice. Working great since! I wasn’t sure if it was the icemaker or the water valve to it so had a guy come
... Read more out ($50) who confirmed it was the icemaker. He wanted $550 to replace it (part/labor). We bought the part here at Part Select for $185 (part/tax/delivery) and saved $265 on a job that took less than 15 minutes.
Read less
Was this helpful?
Thank you for voting!
freezer was cold fridge was not
15 of 32 peoplefound this instruction helpful.
theodore from PUEBLO, CO
Really Easy
30 - 60 mins
Screw drivers
Took shelving out of freezer removed panel. Took second panel out and removed motor. Whole repair took 45 minutes. Works perfect
My Orders
