Keep the center door flap moving smoothly with this replacement spring for select French door refrigerators. The spring adds tension so the flap opens and closes as the doors move. Replace it if the flap stays open, blocks the door, or makes a rattling sound. Unplug the refrigerator before starting the repair. Check the exact appliance model number before ordering.
When the folding divider on a French-door refrigerator will not retract, the spring pin or sleeve may be worn or broken. This support piece helps hold the mullion spring in the left door so the flap moves as the doors open and close. Check for a missing spring, cracked hinge point, bent flap, or door alignment problem before choosing a re...Read moreplacement. Confirm fit with the full appliance model because small sleeves can differ. Record the spring position before removal and avoid forcing brittle plastic. Install the sleeve in the same direction shown in the service diagram, reconnect the spring carefully, and test the flap before loading the door with food.
This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrigerator, and then allows the refrigerator handle to slide onto it. Your refrigerator normally has two of these fixer screws, so be sure to check how many you require before ordering.
This a genuine OEM temperature sensor, designed for use with refrigerators, and is an individual part. This temperature sensor is responsible for detecting and adjusting the temperature in your refrigerator. If your refrigerator is having issues with being either too cold, or too warm, it is likely that this sensor needs to be replaced. T...Read moreo replace it, ensure that your refrigerator is turned off before you locate it with your user manual and replace it.
This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing. Its dimensions are approximately 4-1/2 inches by 12-3/4 inches by 4-1/4 inches, and it can produce about 84 ice cubes within 24 hours. Thi...Read mores genuine OEM assembly is sold separately from the water line and the water inlet valve.
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin th...Read moree repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.
This refrigerator water filter is supplied by Samsung to ensure it is an accurate fit for your fridge. It has a capacity of 300 gallons. The water filter helps to reduce water contamination by removing unwanted substances like chemicals and heavy metals which can make their way into your water supply. Each filter is tested and certified b...Read morey NSF international as a guarantee of safety. If the filter light indicator on your fridge is red, this indicates that it is time to change your filter. Each filter also comes with a monthly reminder sticker inside the packaging to help you remember to change your filter.
This is a power cord made for Samsung refrigerators. If your current power cord is damaged, broken, or no longer supplying power to your fridge, you can disconnect it from the wall outlet, strip it from your fridge, and replace it with this OEM cord. This power cord is sold individually and does not include any other parts or accessories.
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
106 of 180 peoplefound this instruction helpful.
Richard from GULFPORT, MS
Easy
30 - 60 mins
Screw drivers
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w
... Read morehen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Read less
Was this helpful?
Thank you for voting!
Left side French Door flap on Samsung refrigerator didn't retract when closing.
51 of 70 peoplefound this instruction helpful.
HOLLIE from FORT WAYNE, IN
Very Easy
Less than 15 mins
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to
... Read more - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read morehe installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.