This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator ...
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evap...
This genuine OEM water filter is made for your side-by-side or French door refrigerator, working to reduce impurities like iron, chlorine, and rust for better-tasting water. With a capacity of 300 gal...
The ice maker assembly in your refrigerator connects to the water source and is responsible for producing ice. If your ice maker is damaged, leaking, or not producing enough ice, you should consider r...
This refrigerator filter case assembly, also known as a water filter head or housing, is compatible with various models of Samsung fridges. The assembly includes the filter head and water lines. It is...
It was simple. I pulled out the old seal from the track it was tucked in and put the new one in using a wood spatula to help along the folding part of the door that fits behind the other door. I replaced both seals under 15 minutes. I am a 63 year old female so I know if I can do it so can you! Tip: make sure that you line up the to
... Read morep and bottom and from side to side evenly before you start pressing it into the track. Refrigerator is working properly now.
YouTube the video on how to replace the ice maker. Unplugged the fridge, one screw was removed to open a small cover panel to access where the ice maker was plugged in, unplugged the ice maker, pushed a small locking clip and pulled the old ice maker off the keyhole slots holding it in place removing it from the fridge. Did the steps in r
... Read moreeverse and reinstalled the new one. Plugged the fridge back in and reset the fridge by holding the energy saver and alarm button on the front door simultaneously for 8-10 seconds until it beeped. Took a few seconds and the fridge reset
Removed handles on Refrigerator and Freezer Door by forcing handles up by pushing in and lifting them up. Unscrewed Phillips screws holding handle mounts to the handles. Placed handle assemblies over the door mounts and slid them down to lock in place.
