This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrigerator, and then allows the refrigerator handle to slide onto it. Your refrigerator normally has two of these fixer screws, so be sure to check how many you require before ordering.
The water in your home can contain impurities that affect its clarity, taste, smell, and safety. Water can contain dirt, rust, chlorine, or water-hardening minerals. These deposits can cause health issues, damage to your refrigerator, and leave your water and ice cloudy and undrinkable. This OEM water filter uses a block of activated carb...Read moreon to filter these pollutants out, giving you healthy, clear, great-tasting water and ice. This filter fits many Samsung refrigerators, and is rated NSF 42 and 53, which certifies that this fridge filter removes pollutants including: chlorine, cysts, asbestos, benzene, sediment, and sand. A good way to judge whether the filter needs to be replaced is when the water flow to the dispenser starts slowing down and there has been no change to the water pressure to the product. There is no bypass needed. Just remove the filter and it will automatically bypass the water filter. It has an easy twist design making the replacement quick and painless with no need for tools or mess. It measures 2.13 inches by 2.13 inches by 8.86 inches and weights 0.56 lbs. Replace every six months.
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle supp...Read moreort also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
This French door hinge is an authentic OEM part used in refrigerators. It is used to provide support and stability to the door allowing it to open and close smoothly. The hinge is vulnerable to wear and tear, and mechanical damage over time. A faulty door hinge will result in difficulty opening/closing the door, door misalignment, inadequ...Read moreate sealing, and increased energy consumption. To begin this repair, locate the screws that hold the hinge to the refrigerator frame and remove them. Carefully lift the door off the hinge and set it aside. Remove the faulty hinge and position the new one in its place. Reattach the door to the new hinge and secure the hinge to the refrigerator frame using the appropriate fasteners.
This a genuine OEM temperature sensor, designed for use with refrigerators, and is an individual part. This temperature sensor is responsible for detecting and adjusting the temperature in your refrigerator. If your refrigerator is having issues with being either too cold, or too warm, it is likely that this sensor needs to be replaced. T...Read moreo replace it, ensure that your refrigerator is turned off before you locate it with your user manual and replace it.
This is an evaporator fan motor for a wide range of Samsung refrigerators. Evaporator fans pull warm air through evaporator coils to cool and maintain the internal temperature of the refrigerator. If the evaporator fan motor in your refrigerator is not working properly, your fridge will not cool properly and may even prevent the ice maker...Read more and water dispenser from working, and it will ultimately need to be replaced. This OEM evaporator fan motor measures approximately 4 inches long by 4 inches wide and will need a screwdriver and needle nose pliers to be removed and installed.
This is the end cap for the freezer door of various Samsung refrigerators. This end cap is made of plastic and features a brushed-metal finish, and simply snaps on or off the end of the freezer door handle. If your freezer door handle is missing its end caps, or if they are damaged, they should be replaced to give your door handle a more ...Read morefinished appearance. Most handles require two end caps, so be sure to consider how many end caps you require before ordering.
This Samsung auto-close lever assembly is an OEM replacement part made for use in Samsung refrigerators. It is a black lever mechanism, measuring approximately 2 inches by 2 inches. When the fridge door is opened, this part ensures that the door that the door closes is able to close by itself and remains securely shut. If you notice that ...Read moreyour fridge door can’t seem to close properly, or it is unstable and slams shut, then the lever assembly will likely need to be replaced. This part is typically located at the top of the fridge door. Each auto-close lever is sold individually.
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin th...Read moree repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
107 of 181 peoplefound this instruction helpful.
Richard from GULFPORT, MS
Easy
30 - 60 mins
Screw drivers
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w
... Read morehen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Read less
Was this helpful?
Thank you for voting!
Water filter needed to be changed.
25 of 56 peoplefound this instruction helpful.
Arlena from CHICAGO, IL
Very Easy
Less than 15 mins
Pliers
unlock filter with pliers with a turn to the right, pull out and replace filter, Turner new filter to the left until it click in.
Was this helpful?
Thank you for voting!
Ice maker frosting up, not making ice
16 of 31 peoplefound this instruction helpful.
daryl from LAKE MARY, FL
Easy
1- 2 hours
Screw drivers
After watching a few you tube videos on the Samsung ice maker removal, this repair was not that bad. The key to this repair is PATIENCE! Unplug your fridge, have a steamer and Phillips & straight screw driver handy. Remove ice bucket, place rags or paper towels in bottom half of ice maker. Fire up your steamer and melt ALL ice befor
... Read moree proceeding! Once all ice is gone, remove one screw to the left on cover for the wiring, remove plastic wire cover , remove screw just below ice maker itself, push locking tab in to release plastic lower tray attached to bottom of ice maker. Once you do this it exposes the refrigerant line (u shaped) under ice maker. If you can still see ice once that plastic cover drops down, yep... more steaming , if you try chip away any remaining ice damage will result to that refrigerant line then it’s game over. Fridge needs to be replaced! Once fully clear of ice , carefully pry that refrigerant line down a bit so it is released from the bottom of ice maker. Do not bend it down too far only enough so it will clear when pulling ice maker out. Un clip yellow electrical connector to ice maker and gently pull the ice maker towards you and down to fully remove. As you are pulling it out be sure refrigerant line does not get hung up. Once removed you may find more ice build up on top of auger assembly. All ice/ frost needs to be gone. Follow u shaped refrigerant line back towards the styrofoam, push one clip on each tube towards the back with the tab facing down! The plastic rectangle trim piece slides off fairly easy. This web page gives detailed pictures on what to expect, as there could be other issues in that ice compartment that need addressed! https://edmondappliancerepairokc.com/samsung-french-door-ice-maker-frosting-up/ Hope this helps, it sure made a difference in mine. The ice maker has been producing ice like never before!