EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

RF24FSEDBSR (AA-0002) Samsung Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Handle Mounting Screw – Part Number: DA61-03734A
No Longer Available
Handle Mounting Screw
★★★★★
★★★★★
(1)
Part #DA61-03734A
This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrigerator, and then allows the refrigerator handle to slide onto it. Your refrigerator normally has two of these fixer screws, so be sure to check how many you require before ordering.
Freezer Handle Support – Part Number: DA61-08247A
$42.06
On Order
Freezer Handle Support
★★★★★
★★★★★
(10)
Part #DA61-08247A
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle support also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
Hinge – Part Number: DA61-08305A
$12.05
On Order
Hinge
★★★★★
★★★★★
(6)
Part #DA61-08305A
This French door hinge is an authentic OEM part used in refrigerators. It is used to provide support and stability to the door allowing it to open and close smoothly. The hinge is vulnerable to wear and tear, and mechanical damage over time. A faulty door hinge will result in difficulty opening/closing the door, door misalignment, inadequate sealing, and increased energy consumption. To begin this repair, locate the screws that hold the hinge to the refrigerator frame and remove them. Carefully lift the door off the hinge and set it aside. Remove the faulty hinge and position the new one in its place. Reattach the door to the new hinge and secure the hinge to the refrigerator frame using the appropriate fasteners.
Temperature Sensor – Part Number: DA32-10104N
$45.05
In Stock
Temperature Sensor
★★★★★
★★★★★
(2)
Part #DA32-10104N
This a genuine OEM temperature sensor, designed for use with refrigerators, and is an individual part. This temperature sensor is responsible for detecting and adjusting the temperature in your refrigerator. If your refrigerator is having issues with being either too cold, or too warm, it is likely that this sensor needs to be replaced. To replace it, ensure that your refrigerator is turned off before you locate it with your user manual and replace it.
Drawer Handle Support (Left) – Part Number: DA61-08229A
$20.27
In Stock
Refrigerator Evaporator Fan Motor – Part Number: DA81-06013A
$130.23
On Order
Refrigerator Evaporator Fan Motor
★★★★★
★★★★★
(6)
Part #DA81-06013A
This is an evaporator fan motor for a wide range of Samsung refrigerators. Evaporator fans pull warm air through evaporator coils to cool and maintain the internal temperature of the refrigerator. If the evaporator fan motor in your refrigerator is not working properly, your fridge will not cool properly and may even prevent the ice maker and water dispenser from working, and it will ultimately need to be replaced. This OEM evaporator fan motor measures approximately 4 inches long by 4 inches wide and will need a screwdriver and needle nose pliers to be removed and installed.
Handle End Cap – Part Number: DA67-02787A
$21.34
In Stock
Handle End Cap
★★★★★
★★★★★
(2)
Part #DA67-02787A
This is the end cap for the freezer door of various Samsung refrigerators. This end cap is made of plastic and features a brushed-metal finish, and simply snaps on or off the end of the freezer door handle. If your freezer door handle is missing its end caps, or if they are damaged, they should be replaced to give your door handle a more finished appearance. Most handles require two end caps, so be sure to consider how many end caps you require before ordering.
Bi-Metal Defrost Thermostat – Part Number: DA47-00243K
$53.27
In Stock
Bi-Metal Defrost Thermostat
Part #DA47-00243K
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
Evaporator Fan Motor – Part Number: DA31-00146H
$142.24
In Stock
Evaporator Fan Motor
★★★★★
★★★★★
(3)
Part #DA31-00146H
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin the repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.
Ice Maker Assembly – Part Number: DA97-18859A
$176.25
On Order
Ice Maker Assembly
★★★★★
★★★★★
(3)
Part #DA97-18859A
This ice maker assembly is for refrigerators. Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
Case Cap – Part Number: DA67-01650A
$9.85
In Stock
Refrigerator Water Filter – Part Number: HAF-QIN/EXP
$53.20
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(3)
Part #HAF-QIN/EXP
This refrigerator water filter is supplied by Samsung to ensure it is an accurate fit for your fridge. It has a capacity of 300 gallons. The water filter helps to reduce water contamination by removing unwanted substances like chemicals and heavy metals which can make their way into your water supply. Each filter is tested and certified by NSF international as a guarantee of safety. If the filter light indicator on your fridge is red, this indicates that it is time to change your filter. Each filter also comes with a monthly reminder sticker inside the packaging to help you remember to change your filter.

Questions And Answers for RF24FSEDBSR

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David - For model number RF24FSEDBSR
March 23, 2023
I need an icemaker dispenser drawer. It says there are 27 variations of this model. I can't find any variation numbers on mine. The serial number is W650443AM1005608.
Chris Boyle Profile
Hello David, thank you for your inquiry. The ice maker dispenser drawer, part number PS11717778, is compatible with your model. We hope this solves your problem!
$189.95
In Stock
Ice Tray Assembly
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Keith - For model number RF24FSEDBSR
July 28, 2021
Motor (fan?) running very loudly. Stops when door is open
Chris Boyle Profile
Hello Keith, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4138377. We hope this helps!
$142.24
In Stock
Evaporator Fan Motor
Was this helpful?
Thank you for voting!
Randall - For model number RF24FSEDBSR
April 21, 2022
Refrigerator or Freezer won't cool
Chris Boyle Profile
Hello Randall, thank you for writing. We suggest testing the sensor PS4138666. At 70 degrees the resistance should be 9.3K ohms, 90 degrees would be 7.7K ohms. at 100 degrees would be 6.2K ohms, and 120 degrees would be 4.3K ohms. If the sensor reads outside of range then it needs replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
$45.05
In Stock
Temperature Sensor
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the RF24FSEDBSR

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
107 of 181 people found this instruction helpful.
  • Richard from GULFPORT, MS
  • Easy
  • 30 - 60 mins
  • Screw drivers
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w hen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Was this helpful?
Thank you for voting!
Main refrigerator was not cooling down adequately.
14 of 15 people found this instruction helpful.
  • James from VISALIA, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
I looked up a YouTube video and it gave pretty well laid out instructions on how to replace the Twin fan assembly in the main compartment.
There was also a suspicion that the sensor wasn't working properly and the fan had ice on it.
Once I removed the main housing at the back of the inside of refrigerator it was relatively easy to replace the fan motor, and sensor.
You have to follow the disassemble procedure closely in getting the main housing out.
You have to remove the clear plate covering the water filter. Then remove the bottom shelf, which then gives you access to the large white back panel. After that its easy to replace the motor and sensor.
Was this helpful?
Thank you for voting!
replacing water filter
15 of 37 people found this instruction helpful.
  • Joan from ST IGNATIUS, MT
  • Really Easy
  • Less than 15 mins
piece of cake, take old one out, put new one in!!
Was this helpful?
Thank you for voting!