This French door hinge is an authentic OEM part used in refrigerators. It is used to provide support and stability to the door allowing it to open and close smoothly. The hinge is vulnerable to wear and tear, and mechanical damage over time. A faulty door hinge will result in difficulty opening/closing the door, door misalignment, inadequ...Read moreate sealing, and increased energy consumption. To begin this repair, locate the screws that hold the hinge to the refrigerator frame and remove them. Carefully lift the door off the hinge and set it aside. Remove the faulty hinge and position the new one in its place. Reattach the door to the new hinge and secure the hinge to the refrigerator frame using the appropriate fasteners.
The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a flat blade screwdriver. Over time, the tray may bend out of shape or mineral deposits build up inside, which makes the ice stick to the tray. Y...Read moreou will find the ice maker underneath the ice bin in the freezer. Use your flat-head screwdriver to release the tab holding the ice maker in place, this will expose the ice tray.
This is a door gasket, also known as a door seal, for Samsung refrigerators. This door gasket is used to create a barrier between the cooled interior temperature of the refrigerator, and the warmer temperature of your home. If this door gasket is warped or damaged in any way, you need to replace it immediately so your fridge can continue ...Read moreto cool optimally. To replace this gasket on your fridge, you simply need to pull off the old gasket, and carefully wrap this new one around the perimeter of the door. This gasket is sold individually and does not come with any other parts or accessories.
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the cubs into the ice bin. This ice maker assembly is made of plastic and measures approximately 12 inches, long by 4.75 inches tall and 4.5 inch...Read morees wide. This ice maker is an OEM part that does not come with any other installation parts and attaches within the freezer compartment via its single wire harness.
This is an evaporator fan motor for a wide range of Samsung refrigerators. Evaporator fans pull warm air through evaporator coils to cool and maintain the internal temperature of the refrigerator. If the evaporator fan motor in your refrigerator is not working properly, your fridge will not cool properly and may even prevent the ice maker...Read more and water dispenser from working, and it will ultimately need to be replaced. This OEM evaporator fan motor measures approximately 4 inches long by 4 inches wide and will need a screwdriver and needle nose pliers to be removed and installed.
This is a power cord made for Samsung refrigerators. If your current power cord is damaged, broken, or no longer supplying power to your fridge, you can disconnect it from the wall outlet, strip it from your fridge, and replace it with this OEM cord. This power cord is sold individually and does not include any other parts or accessories.
This Samsung hex screw is a genuine OEM replacement fastener that is designed for the refrigerator door handle. It is a stainless steel screw that secures the handle to the refrigerator door. It is responsible for providing stability and support to the handle to ensure that the handle remains firmly attached and functional. Over time the ...Read moremounting screw may fail, typically due to wear and tear, accidental damage, or corrosion, and the handle may become loose or detach completely. A loose or detached handle can make it difficult to open or close the fridge door properly. Additionally, an unstable handle can cause damage to the door or handle mechanism, which can result in further costly repairs. Therefore, it is recommended to replace the mounting screw(s) promptly to ensure you can continue to use and enjoy your refrigerator. Be careful not to overtighten the screw during the repair as this can damage the handle and mounting surface. Each hex screw is sold individually.
This white-colored flipper or mullion assembly serves as a seal mechanism found between the French doors of your refrigerator. It measures 36 inches in length and 2 inches in width. Positioned along the inner edge of one door, it flips into place to close the gap when the doors meet. A broken assembly might result in loose door closure an...Read mored escaping cold air, so it is important to replace it to keep your food fresh. This genuine OEM replacement part is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
old gasket mold and torn
4 of 4 peoplefound this instruction helpful.
Derek from MALIBU, CA
Very Easy
Less than 15 mins
Pull out old one from right top. Wipe track with a cloth and some Windex. Wipe with clean cloth place gasket over where it will replace old. Start right top push into track. Time 10 minutes once all seated again go over the entire gasket check all in track push with thumb easy replacement!!
Was this helpful?
Thank you for voting!
The spring broke on the door flopper
8 of 17 peoplefound this instruction helpful.
Stephanie from MANCHESTER, CT
Very Difficult
More than 2 hours
I didn't do the repair because you sent me the wrong part.That was mislabeled. Then you want me to ship it back but didn't pay for the shipping?And that would be twelve dollars so it's going in the trash!! Very displeased
Was this helpful?
Thank you for voting!
The ice maker was overflowing and freezing over
2 of 4 peoplefound this instruction helpful.
Paul from Streator, IL
Really Easy
30 - 60 mins
Socket set, Wrench set
I watched several repair videos and decided I could do this because I have been doing mechanical work for over fifty years.The videos convinced me it needed replaced it is a 2009 model I bought new. I ordered the new part from parts select it came in 3 or 4 days.The hardest part was removing the freezer door and reinstalling when I was do
... Read morene.That wasn’t complicated just awkward.Removing the ice maker was simple and replacing it with the new one was easy.There was a protective plate on the front of the old one that wouldn’t fit on the new one.So I left it off.So far it has been working very well.