EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

RF18HFENBSR (US-00) Samsung Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Mullion Spring – Part Number: DA81-01345B
$9.85
In Stock
Door Mullion Spring
★★★★★
★★★★★
(69)
Part #DA81-01345B
This part applies tension to the hinged center mullion on a French door refrigerator, helping the flap move into position as the door opens and closes. The metal spring supports the motion needed for the mullion to seal the gap between the doors when closed. A stretched, broken, or missing spring may leave the flap loose or prevent the door from closing smoothly. Replacing a damaged spring helps restore controlled mullion movement and proper positioning of the center sealing flap during everyday use. This is an OEM part sourced directly from the manufacturer.
Refrigerator Door Gasket - White – Part Number: DA63-07733A
$90.43
On Order
Refrigerator Door Gasket - White
★★★★★
★★★★★
(4)
Part #DA63-07733A
This is a door gasket, also known as a door seal, for Samsung refrigerators. This door gasket is used to create a barrier between the cooled interior temperature of the refrigerator, and the warmer temperature of your home. If this door gasket is warped or damaged in any way, you need to replace it immediately so your fridge can continue to cool optimally. To replace this gasket on your fridge, you simply need to pull off the old gasket, and carefully wrap this new one around the perimeter of the door. This gasket is sold individually and does not come with any other parts or accessories.
Ice Maker Assembly – Part Number: DA97-07603B
$190.95
In Stock
Ice Maker Assembly
★★★★★
★★★★★
(13)
Part #DA97-07603B
A faulty ice maker may stop making ice, leak water, or make clicking and grinding sounds. These problems can also come from the water valve, fill tube, wiring, or freezer temperature, so check the system before ordering. This replacement assembly makes and releases ice into the freezer bin on select refrigerators. Use the complete refrigerator model number to guarantee the proper fit. It does not replace the version ending in the letter C. Before repair, unplug the refrigerator, close the water supply, remove the ice bin, and follow the model diagram. This is an OEM part sourced directly from the manufacturer.
Refrigerator Evaporator Fan Motor – Part Number: DA81-06013A
$130.23
In Stock
Refrigerator Evaporator Fan Motor
★★★★★
★★★★★
(6)
Part #DA81-06013A
This is an evaporator fan motor for a wide range of Samsung refrigerators. Evaporator fans pull warm air through evaporator coils to cool and maintain the internal temperature of the refrigerator. If the evaporator fan motor in your refrigerator is not working properly, your fridge will not cool properly and may even prevent the ice maker and water dispenser from working, and it will ultimately need to be replaced. This OEM evaporator fan motor measures approximately 4 inches long by 4 inches wide and will need a screwdriver and needle nose pliers to be removed and installed.
Evaporator Fan Motor – Part Number: DA31-00146H
$142.24
In Stock
Evaporator Fan Motor
★★★★★
★★★★★
(3)
Part #DA31-00146H
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin the repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.
Tapping Screw – Part Number: 6002-000213
$6.40
In Stock
Tapping Screw
Part #6002-000213
Check your dishwashers model number to confirm compatibility before ordering this OEM tapping screw for bracket installation. It has an M4 thread, is 12 mm long, and has a Phillips drive with a white zinc-phosphate coating.
Power Cord – Part Number: 3903-001003
$89.05
In Stock
Power Cord
Part #3903-001003
This is a power cord made for Samsung refrigerators. If your current power cord is damaged, broken, or no longer supplying power to your fridge, you can disconnect it from the wall outlet, strip it from your fridge, and replace it with this OEM cord. This power cord is sold individually and does not include any other parts or accessories.
Fan Blade Assembly – Part Number: DA31-00010D
$29.74
In Stock
Fan Blade Assembly
★★★★★
★★★★★
(1)
Part #DA31-00010D
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.
Screw – Part Number: 6009-001526
No Longer Available
Screw
★★★★★
★★★★★
(2)
Part #6009-001526
This Samsung hex screw is a genuine OEM replacement fastener that is designed for the refrigerator door handle. It is a stainless steel screw that secures the handle to the refrigerator door. It is responsible for providing stability and support to the handle to ensure that the handle remains firmly attached and functional. Over time the mounting screw may fail, typically due to wear and tear, accidental damage, or corrosion, and the handle may become loose or detach completely. A loose or detached handle can make it difficult to open or close the fridge door properly. Additionally, an unstable handle can cause damage to the door or handle mechanism, which can result in further costly repairs. Therefore, it is recommended to replace the mounting screw(s) promptly to ensure you can continue to use and enjoy your refrigerator. Be careful not to overtighten the screw during the repair as this can damage the handle and mounting surface. Each hex screw is sold individually.
Door Support with Mullion Heater - White – Part Number: DA97-07661C
$170.09
In Stock
Door Support with Mullion Heater - White
Part #DA97-07661C
This French-door flipper assembly fits select refrigerators. It mounts on the inside edge of the left door and swings into place when the door closes. The rail covers the gap between both doors to help keep cold air inside. A built-in heater helps prevent frost and moisture along the center seal. Replace the assembly if it is cracked, bent, stuck, or no longer closes correctly. Use the exact refrigerator model number to guarantee the proper fit. Unplug the refrigerator before repair because the assembly includes an electrical connection. This is an OEM part sourced directly from the manufacturer.
Compressor Overload Protector – Part Number: DA34-00004D
$47.95
In Stock
Compressor Overload Protector
Part #DA34-00004D
RELAY PROTECTOR O/L;4TM4
Drain Tube – Part Number: DA97-04049D
$36.95
In Stock

Common Symptoms of the RF18HFENBSR

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Installation Video Incorrect
35 of 46 people found this instruction helpful.
  • Cheryl from PALATINE, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t he installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Was this helpful?
Thank you for voting!
Door Mullion Spring broke
11 of 21 people found this instruction helpful.
  • Linda from OAKLEY, CA
  • Very Easy
  • Less than 15 mins
Went to You Tube and saw video on how to replace broken mullion spring. Ordered part online (more than one in case one broke -very cheap <$3.00 per part). Watched video twice and was able to follow instructions and insert spring correctly. Not difficult if you pay attention to details on how the spring must fit and which end goes wher e. The door works perfectly!
Was this helpful?
Thank you for voting!
spring in door mullion had broken
12 of 25 people found this instruction helpful.
  • Gary from TUPPER LAKE, NY
  • A Bit Difficult
  • 1- 2 hours
  • Pliers
There is a pretty good video about this on youtube, but complications arose nonetheless. The replacement spring supplied by Partselect is a bit different from the original in two ways. First, it is made of heavier-gauge wire; this is a good thing for durability, but it makes installation tougher. Second, the ends of the spring, which a re bent at right angles to the spring axis in order to fit into the plastic sleeves that hold the spring ends, are far too long. Once I figured this out, i snipped the ends down by a quarter inch or so, and they fit into the sleeves just fine after a certain amount of persuasion from needle-nose pliers. All things considered, it was a bit harder than it should have been, but the door works now, so all is well.
Was this helpful?
Thank you for voting!