My Orders
RC8400XBW1 Whirlpool Cooktop - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$33.69
In Stock
Surface Burner - 8 Inch - 2600W
Part #WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replac...Read moree the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
Read less
$28.42
In Stock
Standard Y-Frame Range Surface Burner
Part #WP660532
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1500W. The manufacturer suggests replacing the receptacle at the same time that you replace the surface burner. Many of our customers have ra...Read moreted this repair as very easy, and you will not need any tools. To complete the repair, simply lift out the old burner and replace it with the new one. Check that the burners are turned off before you begin this repair.
Read less
$20.37
In Stock
$18.22
In Stock
$9.62
In Stock
Range Surface Burner Stabilizer Clip Kit
Part #814103
The surface burner stabilizer keeps your burners level and secure to your gas range. Stabilizers are used to ensure there is a constant burning of the gas-air mixture by the surface burner. If your burner is not producing heat, or not heating evenly, there could be an issue with the stabilizing clip. The clip is made of plastic, and if it...Read more is broken or not working properly it should be replaced. This genuine OEM surface burner stabilizer kit is sourced directly from the manufacturer, and comes with everything you need to install the stabilizer clip. This includes the clip, one screw, and one nut.
Read less
$7.47
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
$9.62
Special Order
Range Mounting Clip
Part #WP4332752
This mounting clip is for the surface burner receptacle of your electric range. Sold individually.
$46.06
Special Order
No Longer Available
$53.20
Special Order
Range Thermal Fuse
Part #WP3188286
When the fuse trips due to a malfunction in the oven this part will trip and shut down your oven controller. It is usually located behind your control panel.
No Longer Available
Surface Burner Center Medallion
Part #868522
This black medallion sits in the center of your electric surface burner. If you need to replace the medallion for all four of your burners, you will need to order four of these.
$8.55
Special Order
Common Symptoms of the RC8400XBW1
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
1 had 2 large burners not working at all, and was cooking everything on the 2 smaller burners
27 of 31 people
found this instruction helpful.
It was so simple to repair - all I had to do was slide the older burners out and slide the new ones in - it took less than 10 min to complete the whole job! No tools used at all.
Other Parts Used:
Was this helpful?
Thank you for voting!
Needed new drip bowls for my stove top burners
17 of 20 people
found this instruction helpful.
After trying for many years to buy the "cheap" drip pans in the store, "They never fit right", I decided to order the correct drip bowls. Now my stove top looks brand new, and my coil elements fit the proper way.
Other Parts Used:
Was this helpful?
Thank you for voting!
Original burners were not working correctly.
14 of 19 people
found this instruction helpful.
I received my ordered in less than a week. It was great. The day I got them I remove the old burners and replaced them with the new ones. It took me about 3 minutes total. I was then able to cook my Christmas dinner with out any problems.
Other Parts Used:
Was this helpful?
Thank you for voting!