This door gasket or seal is used in ranges and ovens. The rubber gasket creates a protective seal between the oven door and the opening of the oven. The function of this seal is to trap heat and prevent it from escaping when the oven door is closed. If your oven door gasket is ripped, damaged, or you find hot air is escaping from your ove...Read moren, it is best to replace the gasket to solve the problem. Remember to unplug your appliance from the power source before installing this part. For installation instructions, refer to the manual provided by the manufacturer.
This sensor is used for later gas range models and has yellow leads. It offers 17.5 ohms of resistance and you can use it with a responder. This oven sensor is suitable for use with many of GE's brands of gas ranges and ovens.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed to replace Drip Pans and Trim Rings for old stove
40 of 47 peoplefound this instruction helpful.
Cynthia from Tampa, FL
Really Easy
Less than 15 mins
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!
Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct
... Read moreparts.
Old gasket had become brittle. Was able to find the 22 yr old model and part on PartSelect (could not track it down on GE's site. Inner panel was removed with four screws. Old gasket came out. Installed new gasket making sure the bead fit into the groove provided in the door panel. Re-assembled. All is well. Thanks
Was this helpful?
Thank you for voting!
Old Drip bowls and Rings
12 of 15 peoplefound this instruction helpful.
Joe from Oakley, CA
Really Easy
Less than 15 mins
Received the Drip bowls and Rings very quickly. Opened the box and then cut open the plastic wrap that the individual rings and drip bowls were in. Lifted the burner on the stove top, took out the old ring and drip bowl. Installed the shiny new drip bowl and ring, then lowered the stove top element back into place. I was able to replace a
... Read morell 4 of them within 5 minutes. Made the 30 year old stove look brand new.Thank you for perfect fit parts and fast delivery.