RC547*01 Hotpoint Range - Overview
Sections of the RC547*01
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Bake Element
PartSelect #: PS249483
Manufacturer #: WB44X5099
This closed hinged-style bake element has screw in terminals.
$45.29
In Stock
8 Inch Surface Burner
PartSelect #: PS244046
Manufacturer #: WB30X348
This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.
$63.64
In Stock
Tilt Lock Hinge Mounted Surface Burner Kit - 6"
PartSelect #: PS244042
Manufacturer #: WB30X342
This genuine 6-inch surface heating element provides the heat needed for cooking on compatible electric ranges and cooktops. Designed with a tilt-lock hinge mounting system, it delivers consistent hea...
$56.93
In Stock
Broil Element Kit
PartSelect #: PS249386
Manufacturer #: WB44X134
This element has screw on terminals.
$48.45
In Stock
Standard Single Hydraulic Range Thermostat
PartSelect #: PS235958
Manufacturer #: WB21X5210
This standard single range hydraulic thermostat is used with some of GE's brands of ranges and ovens. The length of this thermostat's capillary is 34 inches.
No Longer Available
Common Symptoms of the RC547*01
[Viewing 6 of 6]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The lower bake element burned out.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!
It worked. What was really cool, once I ordered the part, I received it in only two work days!
Goo ... Read more d job folks!
It worked. What was really cool, once I ordered the part, I received it in only two work days!
Goo ... Read more d job folks!
Read less
Parts Used:
-
Carlos from Southaven, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
67 of 72 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced lower element in GE Spectra range.
Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!
Parts Used:
-
Phillip from Greeneville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
22 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element burned through. Sparks were flying!
Turned off power at breaker panel. Removed 2 screws attaching element to stove. Pulled element out a couple of inches and removed 2 wires attached with screws. Installation is reverse order of removal.
Be careful not to twist the terminal ends when tightening screws.
shipping was very fast!
Be careful not to twist the terminal ends when tightening screws.
shipping was very fast!
Parts Used:
-
David from Baton Rouge, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
19 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!