EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

RC-45 Shindaiwa Brush Cutter - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Eyelet – Part Number: 72005-92630
$6.40
In Stock
Eyelet
Part #72005-92630
Genuine Shindaiwa replacement part, this item is sold individually. The Eyelet is installed in the spool housing of the Trimmers shown below. Most of the Trimmers are dual line, so two Eyelets are required. The Eyelet creates a smooth surface for the cutting line to exit the spool.
Fuel Cap Assembly – Part Number: A033000070
$6.40
In Stock
Fuel Cap Assembly
Part #A033000070
This fuel cap assembly is a genuine OEM part and is designed for use with outdoor handheld power equipment. Replacing your fuel cap is as simple as removing the old one and screwing the new cap on. This fuel cap keeps the fuel within the tank during operation, preventing leaks, and ensures that no dirt or debris enter the carburetor, filter, fuel lines or engine. Made of plastic with a cork seal underneath, this fuel cap is sold as an individual part, and has an approximately 2-inch diameter.
Gasket – Part Number: V107000010
$6.40
In Stock
Gasket
Part #V107000010
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will eventually become brittle because it interacts with gas and oil, meaning it will need replacing before it becomes debris in the fuel tank. This gasket not only prevents debris from entering the fuel tank, but it also prevents any leaks. To replace, simply unscrew your gas cap and remove the old gasket from the cap, and then replace it with the new.
Air Filter – Part Number: A226000650
$6.40
In Stock
Air Filter
Part #A226000650
This is genuine Shindaiwa replacement part, it is sold individually. The air filter is placed in the Cleaner Body, then the Cleaner Cover is placed over it. The purpose of the Air Filter is to keep debris and contaminants from entering the carburetor and engine. You should inspect the filter from time to time, to make sure it is clean or if it is time to replace it.
Clip – Part Number: V490000500
$6.40
In Stock
Clip
Part #V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.
Button – Part Number: 99909-15590
$6.55
In Stock
Button
Part #99909-15590
This authentic part is designed for Shindaiwa handheld trimmers. It is supplied directly from the original equipment manufacturer. The button is pressed on the ground to extend the cutting line from the spool. It is an identical replacement for a damaged or a missing component that was installed on a new unit. To ensure the correct installation of the new part, refer to the appropriate diagrams of your model. One durable plastic button is included. To perform this repair no tools would be needed, remove the old and secure the new one.
Spool – Part Number: 99909-15580
$16.14
In Stock
Spool
Part #99909-15580
This is an authentic Shindaiwa replacement part that has been sourced from the original manufacturer to be used with trimmers. The plastic spool is used to store trimmer line within the cutting head assembly. This item is sold as an individual replacement part, please note tools may not be needed to install the spool.
Spring – Part Number: 99909-15520
$6.40
In Stock
Spring
Part #99909-15520
The spring goes between the spool and the housing and is available individually. If this part becomes broken or bent it will need to be replaced. During installation, a wrench may be needed to replace the metal spring. This is an authentic replacement part sourced from the original manufacturer for use with Shindaiwa brushcutters and trimmers.
Cover – Part Number: 99909-15610
$19.69
In Stock
Cover
Part #99909-15610
This item has been sourced from the original manufacturer and is intended to be used with trimmers and brushcutters from Shindaiwa. The durable plastic cap is used to support the spool and bump. This item aligns with the tabs on the housing and secures the spool within the housing. This item is available as an individual replacement part.
Trimmer Hex Bolt – Part Number: 90010505012
$6.40
In Stock
Trimmer Hex Bolt
Part #90010505012
This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications. The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.
Fuel Tank Strap – Part Number: A392000060
$6.42
In Stock
Fuel Tank Strap
Part #A392000060
This is a genuine Shindaiwa part made to fit brushcutters and water pumps. Two flexible straps attach the fuel tank to the main body of the machine. There are channels which hold the straps into place, securing the fuel tank. Two metal hinges are attached to each end of the strap. This listing is for one strap.
Trimmer Pawl Return Spring – Part Number: 17723440630
$6.40
Special Order
Trimmer Pawl Return Spring
Part #17723440630
This is a genuine replacement part manufactured for use with lawn and garden equipment. The starter pawl return spring returns the starter pawl to its normal position after pulling the starter rope. If the pawl spring wears out the pawl will remain engaged witht the starter pulley. The starter pawl return spring is sold individually.