RB757BC2WH Hotpoint Range Parts & Repair Help | PartSelect
Models > RB757BC2WH

Sections of the RB757BC2WH

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(23)
PartSelect #:PS244399
Manufacturer #:WB31T10015
This part is located beneath the element and catches any spills.
$8.65
In Stock
(1)
PartSelect #:PS244398
Manufacturer #:WB31T10014
This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in d...
$7.51
In Stock
(41)
PartSelect #:PS249238
Manufacturer #:WB44K10005
The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has ...
$89.03
In Stock
(11)
PartSelect #:PS242972
Manufacturer #:WB2X8228
Also known as receptacle.
$20.18
In Stock
(19)
PartSelect #:PS783534
Manufacturer #:WB17T10006
This kit includes the female contact with wires, terminal block and mounting clip.
$16.55
In Stock
(27)
PartSelect #:PS236750
Manufacturer #:WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off...
$32.04
In Stock
(10)
PartSelect #:PS6447646
Manufacturer #:WB48T10095
The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides ...
$54.21
In Stock
(13)
PartSelect #:PS236754
Manufacturer #:WB24T10029
This switch controls the small burner on a range/stove top.
$36.83
In Stock
(2)
PartSelect #:PS2320972
Manufacturer #:WB02K10158
This is a replacement drawer support for your oven. The drawer support provides stability to the drawer unit as it opens and closes. If your oven drawer is hanging or will not slid...
$3.56
In Stock
(8)
PartSelect #:PS249236
Manufacturer #:WB44K10002
This broil element is found on the roof of the oven.
$77.51
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower bake Element would not heat.

  • Customer: Ronald from Nassau, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 198 of 210 people found this instruction helpful
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect. read more

The Bake-o-lite (Hard Plastic) block that holds the burners female connection in place had chipped away over time and wouldn't allow the male part of the burner to connect up correctly.

  • Customer: Robert from Mt. Vernon, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 108 of 110 people found this instruction helpful
After unplugging the range I took the rear sheet metal panel at the top off with a nut driver to expose the wiring connections. The next step was to remove the single screw holding the old part in place. (under the drip pan) Once free I snipped the old part from the wires and then taped the new female ends to the old wires with black electrical tape. From re... read more

The switches failed on both front burners.

  • Customer: Marc from Columbia, NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 80 of 86 people found this instruction helpful
Remove nobs from both switches.
Pull out the range (the hardest part).
REMOVE THE POWER PLUG FROM THE WALL
Remove 7 screws with nut driver and take off upper back panel.
Remove 2 phillips screws from front, they hold the switch brackets.
The new switches don't fit in the bracket so discard the bracket keeping the screws.
Removin... read more