This sensor cover, also known as the ice maker thermostat cover, is a genuine OEM replacement part for Samsung refrigerators. It is made of durable white plastic and has measurements of approximately ...
This evaporator fan blade is for refrigerators. Evaporator fan blade circulates air through the evaporator fins and interior compartment of the refrigerator to improve the cooling efficiency.
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
December 17, 2019
Trying to hook up ice maker. The water input to the refrigerator is smaller than the standard 1/4. Do i need to get a special water line for this unit?
For model number RB215LASH
Hello Joseph,
Thank you fro your question. The water line for your model is only available in the water pipe assembly under part PS4169182, and that is the only water line compatible to your model. We hope this helps!
Water is pouring into the icemaker with out making ice.
For model number RB215LASH
Hi Martin, thank you for reaching out. According to our research, the issue is most likely related to the ice maker, part number PS4171161. We hope this sorts out your problem!
Do you have a replacement gasket for the refrigerator door? This unit has the refrigerator on the top and the freezer on the bottom. Also do you sell the adhesive necessary to install the replacement? Thank you.
For model number RB215LASH
Hello Cheryl, thank you for your question! The door gasket for your model is not sold separately. You will need to replace the complete refrigerator door assembly, part number PS4165849. We hope this information helps!
Unplugged and defrosted the unit. Took the back off. Unplugged the heater element. Plugged new part in and replaced back. Plugged fridge in checked next morning. All good
Have not done installation yet. Trying to figure out what to do since the part did not come with the plastic cover to go in front of the LED temp readouts. Part does no good without the cover.