RA720K1WH Hotpoint Range Parts & Repair Help | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
Models > RA720K1WH

RA720K1WH Hotpoint Range - Overview

Manuals & Care Guides for RA720K1WH

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(13)
PartSelect #:PS242972
Manufacturer #:WB2X8228
Also known as receptacle.
$16.05
In Stock
(20)
PartSelect #:PS783534
Manufacturer #:WB17T10006
This kit includes the female contact with wires, terminal block and mounting clip.
$15.96
In Stock
(13)
PartSelect #:PS244696
Manufacturer #:WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow greas...
$14.84
In Stock
(19)
PartSelect #:PS244697
Manufacturer #:WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is inte...
$10.06
In Stock
(29)
PartSelect #:PS236750
Manufacturer #:WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off...
$25.88
In Stock
(6)
PartSelect #:PS243701
Manufacturer #:WB2X9719
The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip i...
$8.20
In Stock
(15)
PartSelect #:PS236754
Manufacturer #:WB24T10029
This switch controls the small burner on a range/stove top.
$33.83
In Stock
(5)
PartSelect #:PS256619
Manufacturer #:WB7X7189
This end cap can be used for either the left or right side.
$17.00
In Stock
(4)
PartSelect #:PS1020380
Manufacturer #:WB25T10041
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user tha...
$3.37
In Stock
PartSelect #:PS283515
Manufacturer #:WR01X10065
Size: 10-32 GXTT FLP .595 Sold individually.
$4.04
In Stock
Questions and Answers for RA720K1WH
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bake-o-lite (Hard Plastic) block that holds the burners female connection in place had chipped away over time and wouldn't allow the male part of the burner to connect up correctly.

  • Customer: Robert from Mt. Vernon, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 110 of 112 people found this instruction helpful
After unplugging the range I took the rear sheet metal panel at the top off with a nut driver to expose the wiring connections. The next step was to remove the single screw holding the old part in place. (under the drip pan) Once free I snipped the old part from the wires and then taped the new female ends to the old wires with black electrical tape. From re... read more

The switches failed on both front burners.

  • Customer: Marc from Columbia, NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 82 of 88 people found this instruction helpful
Remove nobs from both switches.
Pull out the range (the hardest part).
REMOVE THE POWER PLUG FROM THE WALL
Remove 7 screws with nut driver and take off upper back panel.
Remove 2 phillips screws from front, they hold the switch brackets.
The new switches don't fit in the bracket so discard the bracket keeping the screws.
Removin... read more

terminal block melted

Terminal Block Kit – Part Number: WB17T10011
  • Customer: jonathan from willow springs, IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 48 of 55 people found this instruction helpful
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal ... read more