R2401 Ridgid Router - Parts

Genuine Ridgid replacement part. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • Parts are sold individually • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carb...Read moreon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine component which is supplied directly from the original equipment manufacturer for Ryobi and Ridgid equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this hardware. Keep in mind this high-quality lock nut is made of durable metal and is sold individually.

This is an authentic manufacturer-approved replacement part. It is specially designed for use with Ridgid equipment. It allows a user to secure the guide in the needed position once it is adjusted. This knob is consists of a durable metal threaded shaft with a plastic grip and is sold individually. Make sure to refer to the appropriate di...Read moreagrams for your model for the exact location and the correct application. Replacing it does not require any special tools, remove the old knob and screw in the new one.

This manufacturer sourced replacement part designed for use on Ridgid power tools. The purpose of the brush cap is to hold the brush in the tool. This cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break. This item is made out of plastic and it is so...Read moreld individually. You would need a flathead screwdriver to install or remove this brush cap.

This is an authentic OEM approved replacement item utilized with Ridgid trim routers and laminate trimmers. In conjunction with a straight edge guide this is one of the bolts which allows router/laminate trimmer to be guided smoothly on rails. Please note this includes one (1) bolt per order. No tools needed to replace this edge guide b...Read moreolt. • Loosen the knob bolt • Remove old bolt • Install new bolt • Secure the knob bolt

It is a genuine item that is supplied by the original equipment manufacturer for use with Ryobi and Ridgid saws and drills. The metal screw attaches to the lower guard support. A phillips screwdriver might be necessary during the installation of this part. This item will need to be replaced if it strips or breaks. Keep in mind that this part is sold individually even though several might be needed.

This is an authentic part from Ridgid for use in trimrouters. It attaches to the base assembly with four screws which are sold separately. The round subbase is made out of plastic and will need to be replaced if it breaks. A screwdriver will be needed during the replacement of this part. This is available as an individual replacement part.

This authentic item is supplied directly from the original equipment manufacturer for use with Ridgid trimrouters. When replacing this part a screwdriver may be needed. Over time the subbase-square may break and will need to be replaced. This item is sold individually and is made out of plastic.