Models
>
R1511
R1511 Sharp Microwave - Overview
Sections of the R1511
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Vent Grille
PartSelect #: PS12661855
Manufacturer #: PDIFB027KIT
Vent cover, white
No Longer Available
Questions And Answers for R1511
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
lcd on sharp r1514 mircowave was illegible
Normal phillips screwdriver used for everything. Unplug microwave, remove top grille (3 screws in grille), remove 1 screw from just above and to the right of the display. Lift panel up, and replace with new board. Have to unplug about 7-8 items and a strip. Would be able to do again in less than 10 minutes, but first time took about 20-25 minutes after spending a couple of hours researching. (some of the research was misleading as you DO NOT have to take the microwave down from range if just accessing control panel)
Parts Used:
-
Stephen from Brisbane, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
