PWT420A Weed Eater Trimmer - Overview

This is a manufacturer approved mow ball assembly used on some Wheeled Trimmers. Mow ball assembly prevents the trimmer from scalping the grass. This Assembly includes the Plastic Housing, Ball Bearing and a Retaining Ring. Please note Bolt used to attach this assembly is Sold Separately.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

Upgrade your Husqvarna equipment with the high-quality Drive Control Cable. This essential component is specifically designed to ensure smooth operation and superior performance. Built to last, it promises enhanced durability and extended lifespan, an essential for maintaining the seamless function of your Husqvarna equipment. Trust this ...Read moreDrive Control Cable to deliver efficiency and reliability throughout use. Invest in reliable and long-lasting performance with Husqvarna, ensuring the best upkeep for your equipment.

This is a genuine manufacturer sourced replacement mow-ball designed for use with wheeled trimmers. It acts as a cover for the carrier plate and it allows for the unit so move smoothly. It is made out of black plastic material and it is sold individually. You would need a wrench to replace this cup.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This replacement belt is a genuine item that is sourced directly from original equipment manufacturer. It is commonly used v-belt for high wheeled trimmers. This is the the main belt that drives the cutter head. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. This part is made out of rubber ma...Read moreterial and it is sold individually. To complete this repair you will need a set of wrenches and a screwdriver. • First remove screw at front of chassis cover • Lift cover up and away from trimmer • Remove the two (2) screws on sides of trimmer securing the debris shield • Turn trimmer on its side with carburetor and fuel cap up • Remove the two (2) screws on under-side of trimmer securing the debris shield • Slide the debris shield rearward and remove • Remove belt from engine pulley on crankshaft • Remove belt from trimmer head pulley • Note the position of the control cable and idler return spring • Remove idler assembly from chassis and re-move belt and idler from trimmer • Remove belt from idler assembly by removing bottom belt keeper and idler pulleys • Assemble new belt, idler pulleys and bottom belt keeper to idler bracket • Tighten pulley bolts securely • Position belt and idler assembly in trimmer, reconnect idler spring and reattach idler to chassis

This is an original replacement part supplied from original equipment manufacturer. This bolt is designed to safely secure the mow ball assembly on a wheeled trimmer. To complete this repair you would need a socket wrench in order to remove/install this bolt. Includes one (1) bolt per order.

This is a genuine replacement bottom deflector which is supplied by the original equipment manufacturer for use with handheld trimmers. It is mounted over the cutting head assembly in order to direct the trimmings away from the user and provide the protection from the string while operating the equipment. This high-quality component is ma...Read morede of durable black plastic and it is sold individually, please note the hardware to secure it is sold separately.

This is a manufacturer approved replacement part designed for use with high wheeled trimmers. This carrier plate acts as a trimmer head/housing which secures the trimmer line. It is made out of metal and it is sold individually. Please note the locking plate/tab is sold separately. To complete this repair you would need a socket wrench to remove the bolt which holds the assembly to the jackshaft.

This is a genuine Craftsman Part for use with Line Trimmers. The idler arm return spring returns the idler arm into position, releasing tension on the belt. The most common reason for replacing the spring is if the blades won't turn. This part is sold individually. The tool that you will need to replace the Idler return spring is Pliers.

This is an authentic OEM part for use with Husqvarna, Poulan, Weed Eater and Jonsered Trimmers. The Spindle bearing cover attaches above the mow ball bearing to prevent dust and debris from entering the upper bearing. This part is sold individually. The tool that you will need to replace the bearing cover is a socket set.