EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

PWB7027SL1SS General Electric Microwave - Overview

Diagrams for PWB7027SL1SS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Fuse – Part Number: WB27X10928
$21.81
In Stock
Microwave Fuse
★★★★★
★★★★★
(21)
Part #WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
HALOGEN LAMP – Part Number: WB02X35488
$27.56
In Stock
Primary Door Interlock Switch – Part Number: WB24X10047
$54.07
In Stock
Primary Door Interlock Switch
★★★★★
★★★★★
(20)
Part #WB24X10047
This interlock switch is located in the door latch.
Knob - Black – Part Number: WB03X21244
No Longer Available
Knob - Black
★★★★★
★★★★★
(7)
Part #WB03X21244
This is a control knob for your microwave. The knob is about 1.5 inches in diameter, is black and silver in color, and is sourced directly from the original manufacturer.
Monitor Interlock Switch – Part Number: WB24X25397
$39.45
In Stock
Monitor Interlock Switch
★★★★★
★★★★★
(5)
Part #WB24X25397
This switch monitor interlock is a critical safety component designed to ensure proper communication between the microwave door latch and the control board. When functioning correctly, it confirms that the door is securely closed before allowing the microwave to operate. A damaged or faulty switch may prevent the unit from starting, even if the door appears latched. Replacing this genuine part restores safe and reliable operation. Installation should be performed with care, and it's recommended to disconnect power before beginning any repair.
Microwave Rotating Ring Assembly – Part Number: WB02X32600
$70.33
In Stock
Microwave Rotating Ring Assembly
★★★★★
★★★★★
(16)
Part #WB02X32600
This glass tray support ring, also known as a rotating ring, is specially designed for microwaves. It is a genuine OEM part that is guaranteed to fit just like the original part. The support ring is found inside the microwave cavity where it holds the glass tray and allows it to rotate smoothly during use. It ensures that food is evenly heated and prevents the creation of hot spots. The ring may fail over time due to exposure to friction and high heat. If the ring becomes damaged and can no longer support the tray, then it will need to be replaced. Each ring contains comes with three wheels.
TRAY GLASS – Part Number: WB27X43590
$113.77
On Order
TRAY GLASS
★★★★★
★★★★★
(13)
Part #WB27X43590
This tray rotates in your microwave ensuring more even temperatures.
THERMOSTAT – Part Number: WB20X10048
$22.96
In Stock
THERMOSTAT
★★★★★
★★★★★
(4)
Part #WB20X10048
Introducing the GE Microwave Thermostat - a vital safety component for your microwave. Crafted with precision, this thermostat is specifically designed to prevent overheating scenarios which can cause hazards. Its main function is to promptly cut off power and shut down the microwave if a potential overheating problem is detected. Due to the potential risks associated with high-voltage capacitors within the microwave, the installation of this part should ideally be handled by a professional service technician. Invest in this GE Microwave Thermostat for optimal safety and maximum performance of your appliance. Trust GE for reliable and safe microwave operation.
Microwave Magnetron – Part Number: WB26X32629
$184.17
In Stock
Microwave Magnetron
★★★★★
★★★★★
(6)
Part #WB26X32629
Genuine OEM magnetron for your microwave. Always use proper safety equipment and follow the manufacturers instructions while installing.
Diode Cable – Part Number: WB27X10037
$41.67
In Stock
Diode Cable
★★★★★
★★★★★
(3)
Part #WB27X10037
This diode cable is a replacement electrical component designed to regulate current flow within an appliance circuit. It helps protect sensitive components and is commonly replaced when electrical faults or power irregularities occur. Proper application should be verified before installation.
Capacitor – Part Number: WB27X11033
$58.05
In Stock
Capacitor
Part #WB27X11033
This capacitor delivers the electrical boost required for motors to start and operate efficiently. Proper capacitance reduces strain on motor components and helps prevent startup failures or inconsistent performance. Replacing a weakened capacitor restores smooth motor operation and supports long-term reliability.
Microwave Canopy Mica – Part Number: WB06X10638
$29.27
In Stock
Microwave Canopy Mica
★★★★★
★★★★★
(6)
Part #WB06X10638
Meet the GE Canopy Mica, a sturdy waveguide cover designed for your microwave. Made with high-quality materials, this essential part safeguards the waveguide channel from any debris, food splatters, and other unforeseen damages, enhancing its overall performance and lifespan. Installation is straightforward, making it an ideal choice for those looking to replace their old microwave waveguide cover. However, be sure to unplug the microwave before starting any installation process. Designed by GE, you can expect this canopy mica to deliver reliable and exceptional service. Add this to your appliance repairs today and experience the difference.

Common Symptoms of the PWB7027SL1SS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 people found this instruction helpful.
  • Kim from Cliffside Park, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Was this helpful?
Thank you for voting!
I diagnosed the problem incorrectly: based on a previous repair.
66 of 141 people found this instruction helpful.
  • Ralph from Brandon, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The old fuse is perfectly good. The new ones arrived within a day.
Was this helpful?
Thank you for voting!
Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.
40 of 67 people found this instruction helpful.
  • Michael from Ridgefield, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reco nnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Was this helpful?
Thank you for voting!