This light bulb is located on the inside of your microwave. The bulb is behind the top grill. It will need to be replaced when it has burnt out and no longer works. Unplug the unit before beginning this repair. Remove the top grill of your microwave, use your screwdriver to open the light socket, scrape off any silicone holding the bulb i...Read moren place, clean the area of any oil and dirt, insert the new bulb into the socket without touching the bulb, slide the holder back into place, line up the tabs on top of the metal plate, and secure the holder back into place.
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse ...Read moreis at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair.
NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Maintain a cleaner kitchen environment with this multi-layer aluminum microwave grease filter. Designed to effectively trap grease particles and reduce odors, it helps prevent buildup in the recirculation system, keeping your microwave running efficiently. Ideal for replacing worn or clogged filters, this part supports a fresher cooking experience and is easy to install.
Restore light inside the cooking area or over the cooktop with this replacement halogen lamp, it fits select microwaves, wall ovens, ranges, and microwave oven combos, disconnect the power before starting the repair, use the exact model number to confirm fit.
This genuine OEM door handle is compatible with various models of microwave. It is made of highly durable plastic with a metallic coating. The door handle provides users with a convenient way of opening and closing the microwave door. It provides a secure grip and allows users to easily access the interior cavity when placing or removing ...Read morefood items. If the handle is broken, loose, or out of alignment then you will need to replace it in order to ensure the safe and effective use of your microwave. Mounting screws are sold separately.
The rotating ring in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If your microwave plate or tray is not turning, you could have a broken or damaged rotating ring. This plastic ring is gray in color and is ap...Read moreproximately 10 inches in diameter. The 3 wheels are made of white plastic. This part is sold individually.
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs airflow through the vent duct. The main reason you would replace the damper bracket is if it is damaged and will not hold the damper in place p...Read moreroperly. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed to hold it in place. You will need a screwdriver in order to secure the mounting bracket into place. Part has been substituted. Part is no lo...Read morenger a U-shaped bracket, it is now a flat mounting plate and will function the same.
This is a control knob for your microwave. The knob is about 1.5 inches in diameter, is black and silver in color, and is sourced directly from the original manufacturer.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike - For model number PVM9179SF1SS
December 14, 2019
Door handle replacement. Need proper door removal steps and how to get access to the handle mounting screws
Hi Mike, Only a licensed technician should install the handle as the microwave door has shielding components that must be tested for leaks before the microwave can be safely used. I hope this helps. Thank you for your question and good luck with your repair!
There is a plate screw on ceiling of my convection oven, this particular part started releasing some stuff that looks like glitter. I saw the part on one of the diagrams and it has the no. 96. I don't know if this in going to help but there isn't a part number but number 96. Thank for any help so i can buy the part.
Hello Jonh, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12709819. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
internal fan will not turn off unless I unplug it. The oven cooling fan may run well over an hour after the oven is shut off to cool down the components. The hotter the temperature was set the longer the cooling fan needs to run to cool off the oven. This is normal.
Hi Tom, thank you for reaching out. Make sure the vents are not blocked. Give your microwave a good clean. When loose debris, grease, and grime build up in your microwave, it can get stuck in the vents and cause your microwave to not be able to cool down, resulting in the fan not turning off. If this does not help, we would recommend checking the thermostat, part number PS2339856. We hope this helps.
GE MICROWAVE, SERIAL NUMBER ZA204289K, STOPPED WORKING AS IF IT HAS NO POWER, CHECKED BREAKER AND THAT'S OKAY.
Hello Vern, Thank you for your inquiry. This could be an issue with the fuse, the thermal fuse thermostat, the high limit thermostat, and the door switches. You can test the parts with a multimeter. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so. Good luck with your repair.
Hi Katy, thank you for your question. When you are having an issue like this, the parts to check would be your door micro switches. You have two of this one: PS237409, and one of this one: PS236997. Good luck with your repair.
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 peoplefound this instruction helpful.
Kim from Cliffside Park, NJ
Really Easy
15 - 30 mins
Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic
... Read morerowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
Was this helpful?
Thank you for voting!
Under the vent light bulbs needed to be replaced
66 of 87 peoplefound this instruction helpful.
Robert from Naples, ME
Really Easy
Less than 15 mins
Screw drivers
Turned of f the circuit breaker to the microwave. Unscrewed the cover (1 screw!) popped out the old bulbs and plugged in the new ones, using the bubblewrap as a handle to be sure my skin didn't touch the light bulbs so the oil from my hands didn't damage or shorten the life of the new bulbs. Turned the circuit back on. That's it!
Was this helpful?
Thank you for voting!
Loss of Rack holder clip for GE Profile Convection Microwave oven
35 of 47 peoplefound this instruction helpful.
Nancy E from Cincinnati, OH
Really Easy
Less than 15 mins
It was super easy! Opened the door, matched up the hole on the side of the microwave convection oven with the first portion of the rack holder clip, pushed in the rack holder clip and made a twist to ensure the rack holder clip seated in the wall of the oven. Less than 30 seconds to install - no tools necessary. I that the clips came
... Read morein an order of a unit of 8 clips, allowing me a quick-fix if I need additional clips for loss. Now I have stable racks within my oven ensuring safe insertion and removal of food from the oven. Having the full use of both of the racks in my convection oven during the summer is a Godsend, especially living in the Ohio Valley with its' hot steamy summers - my kitchen stays cool as a cucumber, and so do I!
My Orders
