Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
PVM9005SJ8SS General Electric Microwave - Overview
Save your modelModel Saved!
Save your model for later to make things easier.
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
We know your home runs smoothly when all your appliances are in top shape. That's why we've got the Milwaukee Switch Assembly just for you. This essential part helps efficiently power on and off your ...
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs air...
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed t...
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
This switch monitor interlock is a critical safety component designed to ensure proper communication between the microwave door latch and the control board. When functioning correctly, it confirms tha...
This grease filter is a genuine OEM replacement part that is compatible with various models of microwave. It has dimensions of 7.5 inches by 5 inches and it is made of durable aluminum mesh material. ...
This microwave vent damper assembly helps control airflow by directing exhaust out of the kitchen and preventing outside air, smoke, or odors from flowing back in when the fan is off. Made from durabl...
This capacitor delivers the electrical boost required for motors to start and operate efficiently. Proper capacitance reduces strain on motor components and helps prevent startup failures or inconsist...
Introducing GE's charcoal air filter, specially designed to keep your GE microwave smelling fresh and free of cooking odors. Measuring 2-1/2 inches by 11 inches, this highly effective filter actively ...
$61.38
In Stock
Order now and your part arrives by Apr 23
Questions And Answers for PVM9005SJ8SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 26, 2024
Reset filter light came on. Can’t seem to find info on where the filter is to change. Does this model have a charcoal filter? Just bought it 6 months ago
For model number PVM9005SJ8SS
Hello John, thank you for your inquiry. According to our research, the red LED indicator will light every 6 months as a reminder to replace the charcoal filter. After replacing the charcoal filters, hold the rest filter for 3 seconds to turn off the red LED indicator. The charcoal filter for your model is part number PS2355813. It is located at the center of the grille. You may need to open the microwave oven door and push the push area on the charcoal filter cover at the center of the grille. Press back on the top of the filter with both hands until the filter lays down almost horizontal. Lift the filter at the bottom until it comes free of the tabs. Slide the filter down and out. We hope this information helps!
Hi Lynne, thank you for reaching out. The dimensions of the compatible grease filter are approximately length: 7-3/4 inches, width: 5 inches, and depth: 3/32 inches. Glad to be of help!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Laura
December 17, 2024
Microwave will count down time and the turntable spins but no heat
For model number PVM9005SJ8SS
Hello Laura, thank you for contacting us. If your microwave's turntable is spinning and the timer is counting down, but it is not heating, it could be due to a few potential issues:
1. Magnetron Failure: The magnetron is the component that generates the microwaves that heat the food. If it fails, the microwave will not heat.
2. Door Switch: If the door switch is faulty, the microwave might not operate correctly, even if the door appears to be closed properly.
3. Capacitor or Transformer Issues: These components are part of the high-voltage circuit that powers the magnetron. If either is faulty, the microwave will not heat.
4. Diode Failure: The high-voltage diode converts the AC power output of the transformer to DC, doubling the voltage to nearly 5,000 volts. If the diode burns out, the magnetron won’t receive enough voltage to operate, preventing the microwave from heating. If the previous steps do not resolve the issue, then we would recommend replacing the diode, part number PS16219547, to solve the problem. Glad to be of assistance!
Hi Paula, thank you for the question. To access the charcoal filter, you may need to remove the vent grille mounting screws. Tip the grille forward, then lift out to remove. Remove the charcoal filter. Slide a new charcoal filter into place. Slide the bottom of the vent grille into place. Push the top until it snaps into place and replace the mounting screws. We hope this information helps!
Did this question help you?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reco
... Read morennect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover and test to see if that solved the problem. If so then well done!!
I followed the generic trouble shooting directions on the web site. It suggested either diode, capacitor and/or magnetron. I test each. All tested OK except diode. It was supposed to measure open in one direction and appox 200k ohms in the other direction. My diode measured open in both directions (tried multiple times, multiple sett
... Read moreings). I replaced the diode. The order process was great and it shipped immediately. I knew I was in trouble when I measured the new diode and it too was open in both directions. It was easy to install but unfortunately no joy - did not solve the problem. At this point it is likely cheaper just to buy a new one
