This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is usually installed at the bottom of the washer. If your washing machine is not spinning or agitating during its washing cycle, or if it simply ...Read moredoes not start, this shift actuator is likely bad and in need of replacing. This shift actuator is made mostly of plastic, and features two holes to secure it with screws, as well as a single wire harness that connects within your washing machine. This shifter is an OEM part and is sold individually.
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, and ultimately help spin the basket of the tub so your clothes finish damp and not soaked. If your washer has issues with spinning or agitat...Read moreing, this part is likely broken or has worn out, and will need to be replaced. To replace this part, some disassembly of your washer will be required, and tools like a screwdriver and socket wrench will be needed. This clutch is sold as an individual and does not come with any other parts.
This drive belt is sourced from the original manufacturer for use in various models of dryers. It is a rubber belt that connects the motor to the transmission of the washer. It enables the drum to spin and agitate during the wash cycle. The belt is prone to wear over time due to the high friction it experiences. The belt may slip, become ...Read morefrayed or lose tension. If the belt is faulty, the drum will have difficulty rotating, you may notice loud banging or squealing sounds, and a burning odor coming from the washer. You can find the belt near bottom of the drum or towards the back.
This is an inlet valve for models of compatible washing machines. Inlet valves are electrically controlled solenoid valves that open and close as needed during the washing cycle, to allow water into the washer. If the inlet valve has failed in your washer, you will likely see an error code or your washer simply will not start due to its f...Read moreailure, and it may even begin to leak water into your washer tub, and will need to be replaced immediately. This part features two valves, each with their own respective wire terminals. When replacing this inlet valve, needle-nose pliers, a socket wrench, and screwdriver will be needed, as well as some disassembly of your washing machine. This inlet valve is an OEM part that does not come sold with any other parts or accessories.
This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it. If this speed sensor is damaged or bad, it will cause your washer drum to rotate too quickly, slowly, or inconsistently. Replacing this sen...Read moresor will require a screwdriver and some minor disassembly of your washing machine. This sensor is an OEM part and is sold individually, so it does not come with any other parts or accessories.
Introducing the GE Spring Clutch, a crucial component for your washer. This intricate item applies steadfast pressure against the shifter hub, dutifully holding it in place for uninterrupted operation. For safe and accurate installation, remember to unplug your washer and wear work gloves to guard your hands. As a member of the renowned G...Read moreE lineage, this spring clutch offers consistent quality and performance. Enhance your washer's functionality today with the GE Spring Clutch.
Facing trouble with your appliance's door? Don't worry, we have your back. Here's a legit OEM Door Assembly from Whirlpool that might be just the fix you need. Created especially for certain models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, this door assembly is all about top quality and exact fit. The pa...Read moreckage is comprehensive?it's not just the inner liner and outer panel, but also some extra parts. To know what else is included, you might want to look at your part diagram. Don't underestimate it?this door assembly is pretty solid, considering its weight. So, we recommend getting some help to lift and install it safely. Trust us, with this strong and reliable Whirlpool Door Assembly, your appliance will not only look better but function just like it used to. Remember, not all parts fit all appliances. To make sure this is the right one for you, do check its compatibility with your model before ordering.
Introducing the GE Transmission Pulley & Nut. This essential component connects to the gear case shaft of your washer to stimulate the agitation and spinning motion. The purchase includes the nut required for attaching the pulley to the gear case shaft. Remember to always ensure your washer is unplugged before commencing installation for ...Read moresafety reasons. Additionally, wearing work gloves during this process will help protect your hands. Trust in the quality and reliability of GE parts to maintain the effective operation of your appliance.
Perfect for your GE washer, the Nut Hub is designed to secure the washer hub to the gear case shaft with precision. It plays a crucial part in ensuring the appliance runs smoothly and efficiently. The installation of this part requires that the washer be unplugged and the water supply turned off, so as to prevent any potential hazards. To...Read more protect your hands during the process, it is recommended to wear work gloves. The Nut Hub is designed with excellent craftsmanship and durable material to ensure long-lasting performance from your GE washer. This component ensures that your washer remains reliable and effective.
This GE DRAIN PUMP SEAL is an essential component for your washer, ensuring a leak-free connection between the drain hose and the washer drain pump. For the assurance of a dry, well-functioning laundry setup, this reliable seal is a must-have repair item. Prior to installation, remember to disconnect power from your washer for safety. It'...Read mores recommended that you wear working gloves during the installation process to guard your hands. Trust the dependable quality of GE to keep your appliance performing at its best.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John - For model number PTW600BSR1WS
December 1, 2024
The flex tray for the detergent softener, the pods, like four trays In one it broke I need another one. I guess it come off track.
Hi John,
Thank you for your question. The part number for the dispenser drawer assembly is PS16743413. We hope this helps!
HOW DO I GET A LID REPLACED
THE WASHER IS 5 MONTHS OLD
Hi John, thank you for reaching out. The washer lid assembly for your model is part number PS16874129. You can order it on our site to get this part. We hope that helps!
Washer makes humming noise when draining water during dpin cycle
Hi David, thank you for reaching out. Check the drain hose for any blockage first. If it is fine, the issue could be with the drain pump, part number PS12723115. You may need to replace it to fix the issue. We hope this solves your problem!
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Thom - For model number PTW600BSR1WS
July 6, 2025
The slide in tray that holds detergent, softener, etc… has broken and I need a replacement.
Hi Thom, thank you for contacting us. The dispenser drawer assembly you are looking for is part number PS16743413. Glad to be of help!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer ran fine but woudl not drain water - low humming noise
62 of 93 peoplefound this instruction helpful.
Mike from NAPLES, FL
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers, Socket set
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps
... Read morefrom pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Read less
Was this helpful?
Thank you for voting!
Would not drain the water from the tub.
37 of 58 peoplefound this instruction helpful.
Micheal from South Bend, IN
Very Easy
Less than 15 mins
Socket set
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
Was this helpful?
Thank you for voting!
Water was dripping into the detergent tray when the unit was off.
26 of 35 peoplefound this instruction helpful.
Richard Bibb from ARLINGTON, TX
Very Easy
30 - 60 mins
Nutdriver, Pliers
Removed the control panel back plate cover. Removed the 3 screws that held the water control valve in place. I then unplugged each solenoid one at a time and plugged it into the new control valve. Once all wires were transferred, I pulled the old valve up and put the new valve on. Then reinstalled the screws that held it down and reinstal
... Read moreled the cover plate. Very simple job !
My Orders
