PTO HORSE (00950727 AND UP) Troy-Bilt Tiller - Parts

This is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The knob attaches to the end of the depth regulator bar and is used to provide a grip to the bar when changing the depth of cut. This item is available as an individual replacement part.

Built for a right-hand position, this 12-inch bolo tine curves to cut and lift soil as the tiller moves. The black coating helps protect the metal during storage and normal use. This is one outer tine, not a complete set. Check the machine diagram for its exact place because ?right-hand? can refer to the tine layout, not simply the side y...Read moreou see. Stop the engine, close the fuel valve, and disconnect the spark plug. Wear sturdy gloves, mount the tine with its curve facing the shown direction, and secure it with sound hardware.

This 12-inch left-hand bolo tine cuts and turns soil as the tiller shaft rotates. Replace it if the blade is bent, cracked, badly worn, or no longer tills at the same depth as the other tines. Left- and right-hand tines curve in different directions, so use the complete model diagram to identify the correct position. Stop the engine, let ...Read moreit cool, close the fuel valve, and disconnect the spark plug lead. Support the tiller securely, wear heavy gloves, and inspect the mounting bolts and tine holder before fitting the replacement.

An authentic item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt tillers. It is a special gasket that helps to provide a tight seal for the front bearing cap, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality part is made of durable composite material and is sold individually.

This is an original replacement part sourced directly from the manufacturer. The flat washer is commonly found in tillers from Troy-Bilt, Yard Machine, and MTD. This part is generally used to help secure the drive shaft assembly in the transmission suspension housing. Please be aware that there are different washers used in the machine...Read more. Refer to the parts diagram to be sure of ordering the correct part. You may require a wrench and pliers when replacing this item. The flat washer is sold as an individual replacement part.