PTHD0701GDA (ASDATRA) LG Air Conditioner - Overview

Diagrams for PTHD0701GDA

See every part. Know exactly what you need.

Parts for the PTHD0701GDA

$12.85

BEARING

★★★★★

(2)

Part #4280A20004M

Unusual noise from an indoor blower can be caused by a worn blower wheel bearing. This replacement bearing provides a smooth support point that allows the wheel to rotate while moving air across the room. Inspect the wheel for cracks, dirt, rubbing marks, or looseness, since these problems can produce similar sounds. Turn off the unit at ...Read more

Read less

Fan Assembly,Axial

★★★★★

(3)

Part #5900AR1173A

The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air conditioner is not operating properly, you will need to replace it with this part. This fan assembly has 5 blades and is approximately 14-1/...Read more

Read less

Fan Motor

Part #4681A20064N

$8.55

Damper,Compressor

Part #4H00982E

$17.15

THERMISTOR ASSEMBLY,NTC

Part #EBG61106833

Indoor AC Motor

Part #4681A20064M

This has been redesigned and will need a new mounting bracket - search by model#.

Cross Flow Fan Assembly

★★★★★

(1)

Part #5901A10027A

The cross flow fan assembly (or evaporator fan blade) is used to produce an even airflow to keep components from overheating in your air conditioner. If you notice your air conditioner giving off warm air it may be due to the cross flow fan being broken. It can be mounted horizontally or vertically. This part is sold individually and is m...Read more

Read less

Bracket,Motor

Part #4960A20032A

$48.45

THERMISTOR ASSEMBLY,NTC

Part #EBG61108912

$36.85

Capacitor

Part #3H00660C

$8.55

Cover

Part #3550A30111A

Filter,Air

Part #5230A20016A

Common Symptoms of the PTHD0701GDA

How this model fails, and the parts that fix it.

Noisy

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Blower fan motor

3 of 4 people found this instruction helpful.

Nimesh from Urbana, IL
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers

Blower fan motor not working. Partselect representative he guide me. Make sure new motor diameter is wide. Purchase motor with mounting bracket. Old motor bracket will not working . my Ptac after installing new motor running smoothly.

Was this helpful?

Motor mount broke due to imbalance caused by mud dobber nests.

1 person found this instruction helpful.

Travis from LOUISVILLE, IL
Easy
30 - 60 mins
Nutdriver, Screw drivers

Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.

Was this helpful?

fan had stripped out and was replacing.

1 of 10 people found this instruction helpful.

Douglas from ENGLEWOOD, TN
Very Difficult
1- 2 hours
Pliers, Screw drivers, Socket set

very tight working situations. made a mistake with a delicate piece of the fan and broke it and that rendered the part unuseful. Since I broke it I considered it to be my fault and just threw it away. Ordered another from another company hoping that just maybe it would be more durable. It arrived in only 4 days. Yours took well over ... Read more

Read less

Was this helpful?