PS282411 Homelite Pressure Washer - Parts

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. Wear work gloves to protect your hands when installing this part.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

This is an authentic OEM sourced replacement part that is made for use with pressure washers. It is made of high-quality materials and is used to remove contaminants from the water that goes through the unit. Over time it may wear out and get clogged eventually requiring a replacement. Note, this durable filter screen is sold individually. Refer to the owner's manual for the correct application.

This is an original part from Homelite. The lock nut (m8 x 1-1/4 mm) is compatible with many pressure washers, and is sold individually. The metal lock nut helps to secure various components of the pressure washer. A wrench, hex key and screwdriver are often needed for the installation.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spray width. It is a nozzle used for regular cleaning duties such as removing dirt from decks or cars, and works very well with soap/detergents...Read more. It is one step more powerful than the white forty degree tip (the least powerful of the quick change nozzles). This is a commonly used nozzle so a backup would come in handy. Sold individually.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with circular saws. The two wire cord is encased in a durable casing and is used to relay electricity from the outlet to the switch assembly. This cord is available as an individual replacement part.

This is an authentic OEM nozzle made to fit the Ridgid and Homelite pressure washers listed below. As a standard sized white nozzle, this part features a forty (40) degree spray width. It is least powerful of the quick connect tips. This nozzle is best suited for light duty washing on surfaces prone to scratching, breakage, and/or paint loss such as aluminum siding, stucco, or cars. This item is sold individually.

This is a genuine Homelite replacement part, sold individually. This nozzle attaches to end of the extension wand, compatible with the Pressure Washers listed below. This particular nozzle has a 0 Deg. spray, which is a straight stream. Attaches to the extension wand easily, requiring no additional tools.