Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PRG3010LP

PRG3010LP Jenn-Air Cooktop - Overview

Get Parts and Repair Help for PRG3010LP

If you know the cooktop repair part you need, you can browse the list of all parts on the PRG3010LP, or you can search by name or part description. You can also find your part by where it is located on the PRG3010LP by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Burner Knob

Sold individually. This knob accepts a D-shaped shaft.


Screw, 10-16 x 1

This screw is sold individually.


Grate Foot

Sold individually. Order quantity needed.



This oven light assembly is a little over four inches long and comes with the lens and 660-watt light bulb. Make sure your appliance is unplugged or circuit breaker is off before installing this new part. It is located inside the oven and may need to be replaced if the socket has failed, causing the light to not come on inside the oven. It may also need to be replaced if you notice that the glass is broken and the whole assembly needs to be replaced. The part is located in the upper right hand side of the oven. To reach the bulb you will need to open the oven door and remove the upper rack.


Door Hinge


External Burner Cap

This part attaches to the top of the burner head.


Burner Head Assembly



Sold individually.





Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

hard to get old one out

  • Customer: robert from chatham, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 28 of 65 people found this instruction helpful
easy to put in read more

The marks are 90 degrees off from our stove markings

  • Customer: David from Rocky Mount, VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
I didn't. I'll need to return these knobs as they won't work for this oven. While they fit and look nice, the marks are 90 degrees off from the stove markings. read more

needed new oven light assembly/part #PS1864256

  • Customer: Sara from Harwich Port, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 25 of 69 people found this instruction helpful
Removed old assembly, attached wires to new and inserted into space for same. Of course you must turn off the range circuit breaker. The part that took the most time was removing the old assembly. Once that was done, the rest took only a few minutes. read more