My Orders
PRD364ELG Thermador Range - Overview
Models starting with PRD364ELG
Click on the best match to narrow your results.
- PRD364ELG (03) Thermador Range (Thermador Range/Stove/Oven Model PRD364ELG/03 Parts)
- PRD364ELG (01) Thermador Range (Thermador Range/Stove/Oven Model PRD364ELG/01 Parts)
- PRD364ELG (05) Thermador Range (Thermador Range/Stove/Oven Model PRD364ELG/05 Parts)
- PRD364ELG (02) Thermador Range (Thermador Range/Stove/Oven Model PRD364ELG/02 Parts)
- PRD364ELG (04) Thermador Range (Thermador Range/Stove/Oven Model PRD364ELG/04 Parts)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$25.59
In Stock
SPACER
Part #00413552
This spacer kit, also known as a grate foot kit, is a set of four padded feet designed to protect your burner grates and prevent scratches on the cooktop. Typically located at the bottom corners of the grates, these feet create a protective layer between the grates and the cooktop surface. You can tell if a grate foot is worn out by check...Read moreing for signs of damage. Look for any missing pieces or significant flattening of each foot. Your grates may also wobble or not sit level on the cooktop. If the grate feet are not replaced when they are worn out, cooking can become difficult. Unsteady grates may lead to spills, while direct contact with the cooktop can cause scratches, damage, or discoloration. To replace the grate feet, start by unplugging the appliance and shutting it off at the circuit breaker. You will need a putty knife and high-temperature adhesive. Lift the burner grate and turn it over. Use the putty knife to pry out the worn-out foot and clean its slot as thoroughly as possible. Attach the new foot into the slot using adhesive. Remember that each genuine OEM kit contains four feet, so make sure to confirm the required quantity for your cooktop before purchasing.
Read less
$37.22
In Stock
TUBE
Part #00189023
This authentic OEM venturi tube, also known as a gas tube connector or surface burner tube, mixes gas and air to create the proper fuel-air mixture for combustion in your range. It is typically located in the burner assembly, connecting the gas supply line and the burner. If the venturi tube is broken, you may observe gas leaks around the...Read more burner and an abnormal or flickering flame. Failure to replace a broken tube can result in inefficient combustion and poor burner performance. To replace the venturi tube in your range, remove any components covering the burner assembly, such as the burner grate. Consult your user manual for guidance on accessing the venturi tube. Use a wrench or pliers to disconnect the tube from its connections. Please be aware that this replacement part is sold individually.
Read less
$17.91
In Stock
NUT
Part #00188978
This nut is designed for use with different makes and models of ranges and cooktops and is a genuine OEM part. This nut is 1mm thick and is 22-threads-per-inch, and is made of high-quality, durable stainless steel. This nut is used to primarily seal and secure the cooktop to your range.
No Longer Available
SWITCH
Part #00428049
This OEM control panel switch, also known as a limit switch or limit sensor, is mounted within the control panel housing on ranges. It is a small component that is responsible for transferring power to the control panel, enabling and disabling the control panel lockout, and for controlling certain oven functions using the knobs. The senso...Read morer can fail due to physical damage or an electrical fault, resulting in difficulties operating the range. To access the switch, first remove the range control panel cover. Unplug the switch from its mounting position and place the new one in its place. Ensure that the new limit switch is properly aligned and secure before reattaching the panel cover.
Read less
$56.90
In Stock
SPARK IGNITION SWITCH
Part #00422748
This spark ignition switch in your stove or range, also known as a potentiometer or burner switch, is an authentic OEM component. It generates the spark needed to ignite the gas in the burner and regulate the heat output. It is commonly found behind the burner control knob on the front panel of your appliance. When the potentiometer is br...Read moreoken or faulty, you may observe delayed or weak ignition of your burner, or it may fail to respond to adjustments made with the control knob. Additionally, you might hear a clicking sound when turning the control knob, but the burner does not light up. To remove it, you need to detach any knobs, covers, or panels that are obstructing access to it. Use your user manual for guidance. Release the switch from any wiring connections and remove any mounting screws that are holding it in place before lifting the switch out of your appliance. Before adding this replacement part to your cart, make sure to confirm the quantity required for your appliance, as this is sold individually.
Read less
$30.25
In Stock
HOLDER
Part #00600607
This holder secures components or tubing in place to maintain proper alignment. Designed for durability, it supports stable operation and system organization.
No Longer Available
IGNITION DEVICE
Part #00603777
$199.91
On Order
Control Board
Part #00619016
This control board fixing kit includes all the necessary components to install, repair, or replace the main electronic control board in your oven or range. The control board is responsible for regulating temperature, managing heat settings, and ensuring accurate cooking performance. Designed for compatibility with select Bosch, Thermador,...Read more and Gaggenau models, this kit provides a secure and reliable solution for restoring proper functionality. Installation requires disconnecting power and following the included instructions for a safe and efficient repair.
Read less
$121.56
In Stock
TEMPERATURE SENSOR
Part #00627375
This oven temperature sensor is designed to accurately measure the internal temperature of the oven cavity and relay that information to the appliance’s electronic control system for precise heat regulation. By monitoring real-time temperature changes, the sensor helps ensure consistent baking and roasting results while preventing overhea...Read moreting or underheating. Replacing a faulty sensor can correct issues such as inaccurate temperature readings, uneven cooking, failure to maintain the set temperature, or error codes related to temperature control. Installation typically involves accessing the sensor from inside the oven cavity, disconnecting the two-wire connector, and securing the replacement sensor in place with mounting screws after power is disconnected.
Read less
$55.34
In Stock
00 Knob
Part #00609106
No Longer Available
FOOT
Part #00427073
$52.75
Special Order
KNOB
Part #00609114
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More