PR18H5FA (968999419 - 2010-04) Bluebird Dethatcher - Overview

This is a genuine OEM part used in Bluebird power rakes, aerators, and bed bugs. Bearings are used to buffer and connect moving parts while still allowing smooth movement. They also stabilize directional movement. Bearings experience high wear and are replaced relatively often. This part is sold individually.

This power rake cable in your dethatcher is 46.5 inches long and is responsible for controlling the power rake mechanism. When the mechanism is engaged, it activates the blades to dig into the grass and remove thatch. If the cable is broken, the blades will not rotate. To inspect your cable, look for frays, kinks, or breaks. If you do not...Read more replace the cable, your machine cannot properly dethatch, which leads to poor lawn health. To disconnect the existing cable from your machine, you have to press its release mechanism or pull it from its socket. This OEM replacement part is sold individually.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

This genuine decal (Decal, Bluebird w/Logo 15.5") is 15.5 inches, and made of a clear sticky paper.

This replacement wheel kit is an authentic manufacturer-supplied kit for use with power rakes. It includes one metal rim and one rubber tire and measures 8 inches by 1.75 inches wide. The wheel provides rolling support, making it easier to move and navigate the rake. The wheel can fail due to several reasons, such as impact with hard obje...Read morects during use, insufficient lubrication, and general wear, especially if used on rough terrain. To replace the wheel first remove any fasteners that secure it to the axle. Clean the axle and fit the new wheel on. Once you have secured the wheel, give it a spin to ensure that it rotates freely.

An authentic replacement part that is supplied by original equipment manufacturer for use with Bluebird power rakes and aerators. It is the main belt that drives the unit, please check appropriate diagrams for correct location of this item. Over time belts tend to stretch and wear out eventually breaking, inspect the belt periodically and...Read more replace it as needed to maintain peak performance. It is a high-quality belt that is made of durable rubber and it is sold individually.

The metal screw attaches to the deck. This is an OEM part sourced directly from the manufacturer and used in lawn mowers made by Husqvarna and Bluebird. This item is available as an individual replacement. It may require a wrench during installation. It will require replacing if it becomes broken or stripped.

Sourced directly from the manufacturer, this Key or Keyway is sold individually, made of metal, and is silver in color. The Keyway is used to connect a drive shaft and a pulley. This part will wear over time, causing the mating part not to spin properly. If you notice signs of damage or wear, it needs to be replaced. It will be found on...Read more the drive shaft. You will need a screwdriver, a socket set, and a wrench set to complete this repair. Customers rate this repair as Easy.

This is a genuine OEM sourced replacement part that is intended to be used with aerators and power rakes from Bluebird. The pulley is used to guide the pathway that the belt travels. This pulley is sold as an individual replacement part.

This genuine manufacturer sourced replacement part designed for use with lawn mowers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper use. This lock nut is made out of metal and it is sold individually. Would require a wrench to remove or install this hex nut.