PPCRT17 ((960920037-02)(2016-06)) Poulan Tiller - Parts

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special needle bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This needle bearing is available as an individual replacement part.

This shift fork spring is found in your outdoor power tools. It helps you to control the speed and power of your machine by engaging and disengaging the gears in the gearbox. When the spring is broken, your machine will make grinding noises or jerk when you try to shift gears. If you overlook a damaged spring, it may lead to severe damage...Read more to the gear mechanism, which can result in costly repairs later. To remove the spring, start by turning off your machine and disconnecting the spark plug. Once you have access to the gearbox, locate the spring. It Is usually connected to the shift fork mechanism, but since the location can vary depending on the model and make of your machine, you will need to consult your user manual. Use pliers or a screwdriver to gently release tension on the spring. This may involve carefully compressing it or unhooking it from specific attachment points. Please be aware that this OEM metal spring is sold individually and is not included with the shift fork.

This item is available as an individual replacement part. The shifting arm attaches to the o-ring and is made of metal. A set of pliers might be required during the replacement of this part. It will need to be replaced if it becomes broken. This genuine item is supplied by the original equipment manufacturer for use with tillers, ride mowers, and cultivators made by Husqvarna, Poulan, Weed Eater, and Jonsered.

This OEM kit includes all the necessary hardware, including new bearings, oil and rubber seals, and rivets, to replace the tine shaft bearings on your tiller or cultivator. The tine shaft bearings support the tine shaft inside the gear case of your machine. If the bearings are damaged, you may experience rattling or squeaking noises, exce...Read moressive vibrations, and difficulties in maneuvering. Uneven tilling or cultivating is a clear indication that the bearings need replacement. To locate and replace your tine shaft bearings, consult your user guide as they can be found on either side of the tine shaft. It is commonly found inside the gear case. You will need to remove any retaining rings holding the bearings in place with pliers or screwdriver. You may need to use a penetrating oil if the bearings are stubborn. Please note that this kit is sold separately from the tine shaft.

Steel balls serve various purposes throughout power equipment, being used within bearings, valves, pulleys, and clutches. Depending on the use for your equipment, these balls can serve different purposes, but these are designed for use within tillers and lawnmowers, and work within shift fork mechanisms, and lock/align with notches on the...Read more mating component, to prevent unwanted shifting or disengagement during operation. This kit comes with 12 steel balls and is an OEM part, without any other hardware. To avoid problems with your equipment and avoid constant repairs of its steel balls in the future, make sure that they are cleaned, lubricated and regularly inspected before and after each use. If you notice issues with gear shifting such as slipping or difficulty engaging the gear, these balls may be worn down and inoperable, and will need replacing immediately. To replace these balls, the process may look different for each model, but generally it will require a screwdriver and socket wrench to access the mechanisms. Make sure to clean and adequately lubricate the mechanisms, according to the manufacturer specifications.

This part is an OEM from the Poulan manufacturer. The bolt is constructed of high-quality metal, and has been designed for use with a variety of lawn and garden machines. Please refer to the specific manual and diagrams for repair instructions. This item is sold individually. A screwdriver and a wrench are often helpful in the removal and replacement.

This is a genuine OEM replacement part that is used for lawn mowers and tractors across a number of brands. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to remove or install this bolt.

It is a genuine OEM item that is made for Craftsman lawn and garden equipment. This is a special component which helps to provide a tight fit for the connected parts. Over time it may wear out and get compressed eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality seal is made of durable metal and is sold as an individual item.

It is an authentic replacement part that is supplied by the original equipment manufacturer for use with lawn and garden equipment. The bearing allows connected components to rotate with minimum friction, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over tim...Read moree it may wear out and begin to fail eventually requiring a replacement, keep in mind this durable metal bearing is sold individually.

This is an OEM sourced replacement part that is manufactured to be used with garden tillers and lawn tractors from Poulan and Husqvarna. This item is used with various types of equipment, please see your model\'s illustrated part diagram for this ring\'s location and usage. This part is sold individually.

This tiller cluster gear is designed for rear-tine and counter-rotating tine tillers to support proper power transfer within the transmission. By managing torque and speed conversion, it helps ensure smooth tiller operation and effective soil cultivation. Built for durability and precise fit, it’s a practical replacement for restoring reliable performance when internal transmission gears become worn or damaged.