Models
>
PP972BM3BB
PP972BM3BB General Electric Cooktop - Overview
Sections of the PP972BM3BB
[Viewing 1 of 1]Manuals & Care Guides for PP972BM3BB
Click to downloadInstall
Installation Instructions
(0.47MB)
Install
Installation Instructions
(2.30MB)
Manual
Owner's Manuals
(2.96MB)
Keep searches simple, eg. "belt" or "pump".
Surface Burner Knob
PartSelect #: PS226362
Manufacturer #: WB03T10025
Sold individually.
$18.01
In Stock
Infinite Control Switch
PartSelect #: PS1016429
Manufacturer #: WB24T10119
This part is sold individually and is for ranges. The control switch turns the surface element on and off and determines the temperature of the element. This will need to be changed if the control swi...
$91.57
In Stock
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$12.22
In Stock
Triple Haliant Element - 12 Inch
PartSelect #: PS2321560
Manufacturer #: WB30T10126
This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and...
$221.28
In Stock
Switch Seal
PartSelect #: PS243590
Manufacturer #: WB2X9504
This part goes between the infinite switch (under the cooktop) and the knob.
$32.19
In Stock
Questions And Answers for PP972BM3BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the PP972BM3BB
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Switch failed
I turned off the circuit breaker and tested the cook top. I pulled the cook top out and laid a piece of plywood over the opening to work on the cook top and not scratch the granite counter top. The mistake I made was to turn the cook top upside down and separate the top from the housing. The dampening springs came off the burners and I
... Read more
could have damaged the elements (but they checked out ok). I turned the whole assembly right side up again and replaced the switch and put it all back together. It works great...thank you for the part.
Read less
Parts Used:
-
John from Fresno, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
34 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric range burner not working due to control switch
Turned off power to counter top range and pulled-up from counter. Set range on counter and removed 16 screws from around the housing allowing me to pull-up and remove range top. Used socket to remove 4 screws holding control switch bracket in place and 2 screws holding bad switch in place. Disconnect wires from bad switch and reconnected
... Read more
to new switch. Placed and screwed switch bracket back in place. Before placing range top back I turned power back on to to test burner operation. Burner and switch operated correctly and I completed screwing range top back in place, setting back down into counter top. Done
Read less
Parts Used:
-
Rodney from Erath, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
21 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
9in portion of heating element inoperable
first ,troubleshot switch--it was ok. next,troubleshot triple element & found that the 9in portion had an open in the heating element itself ordered .new element,installed it .Works like new!
Parts Used:
-
John from LEWES, DE
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
20 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!