This is a dual ceramic surface burner for ranges. This burner, also known as a heating element, is used within electric ranges to act as a stovetop burner. This burner measures approximately 10 inches in diameter and features a larger and smaller heating element that you can activate with the control board of your stovetop. If your stovet...Read moreop burner is currently not heating correctly or consistently, then it will need to be replaced immediately. This burner features a ceramic construction with metal parts like the terminals that connect directly to your range. This burner is an OEM part and is sold individually, so depending on how many of this burner your range uses, you may need to consider that before ordering.
This 6-inch radiant surface heating element is designed for use in electric cooktops and ranges with smooth-top surfaces. Positioned beneath the glass cooking surface, it delivers consistent heat to the designated burner area. The element typically measures slightly over 6 inches in diameter—closer to 7 inches—and operates at 1500 watts w...Read moreith a voltage rating of 240 volts. It is engineered to provide efficient and even heating for everyday cooking tasks. Installation involves accessing the underside of the cooktop, disconnecting the faulty element, and securing the replacement in place. Always ensure the appliance is powered off before beginning installation.
This is foam tape and it is usually used in conjunction with your range, specifically on the cooktop. Its purpose is to help seal the edges of the cook top to the counter top. Another of its functions arises is if your cooktop does not sit properly. This tape can give it a better fit by adding additional stability. It is black in color an...Read mored can be used for gasketing, sealing, and stopping vibration. Before making this repair, make sure to shut off the circuit breaker for your appliance in order to disconnect electrical power.
This surface element is designed to deliver heat to a specific cooking zone on the top of an electric range, providing consistent and efficient performance for everyday meal preparation. Located beneath the cooktop surface, it plays a key role in maintaining accurate temperature control. Before installation, be sure to unplug the range or...Read more switch off the appropriate circuit breaker to ensure safety. Wearing protective work gloves is also recommended to prevent injury while handling electrical components.
This part is the replacement spring for the radiant element in your range. It is black in color, curved in shape, and is approximately 1 inch by 1/2 an inch. The radiant element spring is found beneath the cooktop on your range. The main reason to replace the spring is if it is damaged or missing. This is a genuine OEM part sourced directly from the manufacturer, and it is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced radiant burner element glass top range
8 of 9 peoplefound this instruction helpful.
Denise from SENECAVILLE, OH
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
First; turn off breaker to stove. Second; remove two Phillips head screws that hold the top on, located in front, underneath, will have to open the oven door to see. Third; prop the top up. Four; disconnect wire clips of old element. Five; plug in new wire clips of new element. Six; unprop the top and realign
... Read more the top. Seven; replace the two Phillips head screws to secure the top, then close oven door. Eight; turn breaker back on. Done and Back in Action! You Can Do This!
Read less
Was this helpful?
Thank you for voting!
Element out LF
9 of 13 peoplefound this instruction helpful.
Brian from HAGERSTOWN, MD
Very Easy
Less than 15 mins
Pliers, Screw drivers
Unplug stove.2 screws out ,lift top ,disconnect bad element, connect new element, put top down .2 screws in .plug stove back in...EASY PEASY
Was this helpful?
Thank you for voting!
Stovetop radiant burner went out
6 of 10 peoplefound this instruction helpful.
Frank from Marietta, GA
Easy
15 - 30 mins
Screw drivers
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.