PP25SFA ((967185701)(2013-06)) Poulan Trimmer - Overview

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This purge bulb is an authentic OEM part from Craftsman for gas blowers, trimmers, blowers and weed wackers. This part disperses fuel to the carburetor to provide starting the blower faster. You will need a screw driver to replace this part. This purge bulb is made of rubber and sold individually.

This is a genuine OEM approved replacement starter spring is specially designed for use with gandheld gas powered blowers and trimmers. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This spring is made out of metal and it is sold individually.

This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine maintains the pressure it needs to run. If the piston ring is damaged, oil can seep into the combustion chamber, causing your engine to exhi...Read morebit rough idling and your machine emit blue smoke. To switch out a defective piston ring, detach the old ring from the piston with a screwdriver. When installing the new ring, you may need to compress it to make it fit properly. Please be aware that this genuine OEM replacement part is bought individually. It is recommended that you replace all the piston rings in your machine at once, as they tend to wear down at the same rate. Carefully review your user manual to determine how many rings your machine needs before placing your order.

This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. Requires a hex key or an allen wrench to install or remove it.

This is a genuine Poulan replacement part, it is sold individually. The purpose of the 530038682 Trigger is to control the speed at which the spool and line rotates on the model shown below. It is connect to the Throttle Cable Assembly. Then to the throttle linkage on the carburetor.

The fixed-line cap has been sourced from the original manufacturer to ensure quality. The cap is intended to be used with trimmers from Weed Eater. The hard plastic cap is used to secure the bottom portion of the cutter head that holds the fixed trimmer line. This item may not require tools to install and is priced individually.

It is a genuine manufacturer-approved replacement component which is made for use with Poulan and Weed Eater string trimmers. This fixed line cutting head is designed to quickly and efficiently cut through the grass. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment operates properly. Not...Read moree, this high-quality component is sold individually. An adjustable wrench would be needed to remove the old part and secure the new one. Refer to the owner's manual for your model to ensure the proper repair procedure.

Smooth trimmer operation depends on a straight shaft and a working drive cable. Replace the upper shaft kit if the tube is bent, the cable is worn, or the head turns poorly. First check both shaft connections and remove any grass wrapped around the cutting head. Confirm fit with the full tool model number. Review the parts diagram because...Read more kit contents may differ. Let the tool cool, remove its battery or spark plug wire, and keep all clamps and fasteners secure.

This is a Manufacturer Approved replacement kit used on a variety of Gas Trimmers/Pruners. This gasket set includes the major gaskets to replace when rebuilding the engine. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time gaskets tend to deteriorate and will need to be replaced. Gaskets in this kit are made out of Composite Material and O-Rings are made out of Rubber.

This genuine replacement coupler is sourced from the original manufacturer and is designed for use with trimmers from Poulan and Husqvarna. It connects the upper and lower sections of the drive shaft assembly, ensuring a secure and stable link for proper power transmission. Ideal for routine maintenance or repairs, this coupler is sold individually and is built to meet OEM standards for fit and performance.

This is a genuine OEM replacement part, it is sold individually. It is used on specific Gas Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into ...Read morethe carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.