PP250E Poulan Chainsaw - Overview

This is an authentic Poulan replacement chain designed for use with chainsaws. It is a key component of a chainsaw which mechanically cuts the material. Over time the chain will stretch, become dull or break. Keep an eye on the condition of the chain and replace as needed. Please note this chain is only for use with 16" bars. Includes one...Read more (1) metal cutting chain per order. The only tool needed for this repair is the scwrench that most likely came with your chainsaw. Otherwise, a flat head screwdriver and a socket wrench will do just fine. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts

This metal pin is available as an individual replacement. It attaches to the left motor housing with the bar adjusting plate and helps to place tension on the bar. The pin may require a screwdriver, pliers, and a socket set to replace if it becomes broken. This is a genuine replacement part that is sourced from the original manufacturer for use with Poulan and Husqvarna chainsaws.

16 in bar poulan pro

It is a genuine manufacturer sourced replacement item which is supplied for use with Poulan electric chainsaws. This special screw is a part of a mechanism which allows a user to adjust the chain tension. Commonly if the chain tension doesn't adjust either the screw or the bolt has stripped threads requiring replacement. It is a high-qual...Read moreity hardware that is sold individually, please note the pin and other components of chain tensioner are all sold separately.

This is an authentic OEM supplied replacement oil tank assembly that is commonly used on Poulan electric chainsaws. It is used to hold the oil that is used by the tool. Please note one durable plastic oil tank with a cap is included per order.

Assy-gear

It is an authentic OEM sourced item which is specially produced for use with Poulan chainsaws. The bar adjusting plate goes between the pin and the screw. This may require a screwdriver, a set of pliers, and a socket set during installation. It is made of metal and will need to be replaced if it becomes broken. This part is available as an individual replacement.

This is an authentic replacement part manufactured for use with Husqvarna chainsaws. The multi-tool is used to service the chainsaw. The tool\'s hex socket can be used to remove parts such as the chain brake cover nuts or spark plug. The multi-tool has a flat screwdriver that can be used to adjust the tension of the bar. This multi-tool is sold as an individual replacement part.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in yard tools from Paramount, Poulan, and Weed Eater, such as trimmers, blowers, and chainsaws. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws use...Read mored in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. The screw is provided as an individual replacement part.