PP10530ES-96192000400 Poulan Snow Blower - Overview

This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for directing the discharge of snow, or other materials that are being thrown by the equipment. The chute base is found at the end of the discharge ch...Read moreute where it acts as a connection point between the chute and the auger housing. The chute base aids in directing the discharge to a specific place, as well as controlling how far the discharge is thrown. If the chute base becomes damaged, cracked, or worn out, it will need to be replaced. A faulty chute base will result in snow being thrown haphazardly, not being thrown far enough or not thrown at all. It can also create blockages in the equipment, leading to potentially expensive repairs. Remove the fasteners that secure the base to the equipment and pull off the old chute base. Align the new chute with the mounting bracket and secure it with the fasteners.

This Husqvarna belt is used in snowblowers. It is an OEM part sourced directly from the manufacturer. The impeller belt goes around the impeller pulley and helps to link rotating shafts. The belt I made of flexible material and will need to be replace if it becomes worn or stretched. This item is priced individually.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This is a genuine replacement part sourced from the original manufacturer for use with snow blowers made by Husqvarna and Poulan. This part attaches to the drive control rod and manages the movement of the shift lever. You will need pliers to replace this part. This spring traction drive is sold individually and made of metal.

The deflector control assembly attaches to the frame. This part is made of metal and plastic and is available individually. This is an authentic Husqvarna and Poulan replacement part that is sourced from the original manufacturer for use with snowblowers. You may need a socket set and a nutdriver when replacing this part. It may become broken or stretched and will need to be replaced.

This is an original replacement part manufactured for use with snowblowers. The special handle knob is used to secure the handles and to adjust the position of the handles. This handle knob is available as an individual replacement part, please note two are required.

This OEM auger control spring in your snow thrower connects the traction control rod and the auger control assembly. It regulates the engagement and disengagement of the auger for effective snow throwing. If the spring is broken or stretched, the auger will not engage properly and may feel loose. Abnormal noises or vibrations may also occ...Read moreur. If not replaced, the auger may become unpredictable or difficult to control. To replace the auger control spring, use pliers to release it from its attachment points. It is commonly located at the end of the control rod, attached to a sleeve. This replacement spring is sold individually.

This is a genuine OEM sourced component which is specially made for use with Husqvarna and Poulan lawn and garden equipment. The washer helps to ensure a tight fit between connected parts, unfortunately, over time the material will wear out and it may begin to crack eventually requiring a replacement. This high-quality part provides an id...Read moreentical replacement for a missing or a faulty friction washer that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this part is made of durable nylon and is sold individually.

The 5/16 Carriage Bolt (5/16-18x5/8) is most commonly used to secure the discharge chute to a snowblower. It can be installed with a wrench or socket, and installation is rated as "Easy" by customers. If your chute comes loose, the part may be broken and if so should be replaced. This part attaches on the chute assembly. Refer to your make, model number and diagrams to ensure this is the right part for you.

This authentic manufacturer-sourced component is specially designed for Poulan and Husqvarna snowblowers. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit. Check the diagrams for your specific model for the exact location and application of this nut. Keep in mind this high-quality component is made of durable metal and is sold as an individual item.

This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of thi...Read mores nut. Includes one item per order. You will need a wrench to tighten or loosen this hex nut.

This nylon-insert flange nut is designed for use on outdoor power equipment to securely fasten components exposed to vibration and torque. The built-in flange helps distribute load evenly without the need for a separate washer, while the nylock insert resists loosening during operation. It’s a simple, reliable replacement for maintaining safety, stability, and secure assembly across a wide range of equipment.