PP033 (TYPE 1) Poulan Trimmer - Overview

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on

This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.

The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "Easy". Refer to your make, model and diagram to ensure this part is correct for you.

Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is made of metal. If the pull cord will not retract into the housing, inspect the Recoil Spring for signs of wear or damage, replacing if ne...Read morecessary. You will need a screwdriver to complete this repair. Customers rate this repair as Easy.

This genuine OEM carburetor intake boot adapter is a rubber replacement part used in trimmers to connect the carburetor to the carburetor adapter. It ensures a proper seal and allows the air-fuel mixture to flow into the combustion chamber. Over time, the boot adapter may wear out, warp, or develop cracks. Signs of a broken boot adapter i...Read morenclude air or fuel leaks around the carburetor and engine issues like rough idling, stalling, or misfires. Using a damaged boot adapter can lead to reduced power and premature wear. To replace the boot adapter, you will need a screwdriver, pliers, a wrench, and a nut driver. Consult your user manual for guidance on accessing the carburetor through the airbox housing. Remove the air filter and airbox base, then locate and remove the faulty air intake boot from the carburetor. Please keep in mind that this boot adapter is not included with the carburetor kit or the carburetor adapter

This is an authentic OEM sourced replacement part designed for use with handheld lawn and garden equipment. This is a standard hardware which has multiple applications depending on the equipment. Please make sure to check appropriate diagrams for correct location and use of this item. One hex socket head screw is included per order.

This is an authentic replacement part supplied from Poulan. It is generally used with gas powered chainsaws. This nut in conjunction with a bolt (sold separately) helps to secure air filter and carburetor. Requires a wrench installing/removing this item. It is sold individually.

This OEM spool cover is designed to protect your trimmer spool and keep it free from damage and debris. It securely holds the trimmer line in place, preventing it from unraveling while you operate the trimmer. The cover, made of plastic, is located at the bottom of the trimmer head. If the cover is broken, you may notice cracks, chips, or...Read more missing parts. This can result in tangled or improperly feeding trimmer line. Furthermore, exposing the spool and line increases the risk of damage and accelerates wear. You will not be able to trim evenly or precisely. Replacing a broken spool cover is a simple task that requires no tools. Just remove the old cover and snap the new one on. Please keep in mind that the spool cover is sold separately from the spool.

This is a genuine Craftsman part for use with Trimmers. The line tap knob releases the cutting line when you bump the knob on the ground while the spool is turning. The most common reason for replacing the bump knob is when bumping the knob against the ground no longer causes the spool to release more line. This part is sold individually....Read more The tool that you will need to replace the line tap knob is a flat-head screwdriver.

This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. Requires a hex key or an allen wrench to install or remove it.