Models
>
PODMW301J
PODMW301J ((03)) Thermador Range - Overview
Sections of the PODMW301J
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
SENSOR
PartSelect #: PS8729847
Manufacturer #: 00642855
This temperature sensor is an OEM replacement part designed for use in ovens/ranges. The sensor detects the temperature inside the oven and relays this information to the control board, which controls...
$59.42
In Stock
Questions And Answers for PODMW301J
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlana
December 14, 2022
Not sure if you're willing to troubleshoot, but my oven is not preheating properly. Baking has been a little weird, longer bakes needed.
With a temp probe in the oven, the appliance beeps to indicate it's preheated to 350, but the probe indicates a temp below 300. It takes about 30 minutes to reach 350.
Could it be a thermostat, or a problem with the heating elements?
For model number PODMW301J
Hello Carlana, thank you for your inquiry. According to our research, the problem seems to be with the Temperature Sensor and you may need to replace it, the part number is PS8729847. If you require assistance placing an order, please contact customer service. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven heating temp not turning off at set temp/overheating
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read more
ed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
Read less
Parts Used:
-
Jaymie from Intercourse, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of 3 rings on roller ring appeared broken. The turntable was properly revolving.
I lifted up the microwave ceramic dish and put it on countertop. Lifted out old roller ring and replaced with new one. This took 10 seconds. Carefully placed ceramic microwave dish back atop roller ring and aligned its center over stationary part that rose from bottom center of oven. This keeps ceramic plate in place as it revolves.
... Read more
I canceled pending service call from local appliance repair service and saved $99.
Read less
Parts Used:
-
Libbie K from NAPLES, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!