PM0167000 ((9708181A - 3000328440)(2016)) Generac Generator - Overview

This is an authentic replacement Generac carbon brush set designed for use with portable generators. Due to a physical contact with an armature, carbon brushes will gradually wear away requiring replacement. This assembly includes a plastic brush holder, two (2) carbon brushes with lead wires and terminals attached. You would need a scre...Read morewdriver to complete this job. • Make sure the unit is unplugged • Remove the old brushes and replace them with the new ones • Reattach the cover and test the motor

This item has been sourced from the original manufacturer to be used with portable generators from Generac. The valve attaches to the fuel tank and is used to either allow fuel to the engine or to prevent the flow of fuel. This item is available as an individual replacement part.

This switch is a high quality item that is specially manufactured by Generac for use on portable generators. It allows user to turn the unit on and off. Because switches have mechanical parts, over time they tend to wear out and begin to fail eventually requiring replacement. This switch has a plastic body and it is sold individually.

This replacement battery is an authentic OEM sourced item that is specially designed for use with Generac portable generators. Over time batteries will become weaker and eventually will not provide enough power to operate the tool eventually requiring replacement. One durable battery is included per order.

This fuel filter is a high quality item that is sourced from original equipment manufacturer for use with Generac portable generators. This part acts as a fuel strainer to remove any debris from the fuel that is poured into the tank. Please note this part is made from durable plastic with mesh filter material and it is sold individually.

It is an identical replacement for a damaged or a missing circuit breaker switch that was installed on a new unit. This authentic item is supplied by the original manufacturer for use with Generac portable generators. This circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage ...Read morecaused by overload or short circuit. Its basic function is to detect a fault condition and interrupt current flow. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality circuit breaker switch is sold as an individual item.

This is a genuine OEM approved replacement in-tank fuel filter, it is designed for use with Generac portable generators. The purpose this part is to ensure the fuel that is supplied into the carburetor is free of dirt and any other contaminants. Over time it may get dirty and logged restricting the fuel flow, if the engine is not getting ...Read moreenough fuel, it is time to replace the fuel filter. It is a durable plastic body in-tank fuel filter which is sold individually.

This pipe-return is a genuine OEM sourced component. It is specially designed for use with Generac portable generators. This is the hose that the fuel travels through. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through t...Read morehe return hose. Over time these rubber hose will become brittle and they may begin to crack eventually requiring replacements. Please note, one durable flexible fuel hose is included. Check the appropriate diagrams for your model to ensure the proper repair procedure.

This starter contactor solenoid is designed for portable generators to control the high-current flow from the battery to the starter motor for dependable engine starting. Acting as a heavy-duty electrical switch, it helps resolve common issues such as clicking without cranking or no-start conditions. Built for durability and reliable perf...Read moreormance, it’s a practical replacement for restoring consistent starting and proper electrical operation in generator systems.