PGR4410CDW Maytag Range - Overview

Diagrams for PGR4410CDW

See every part. Know exactly what you need.

Parts for the PGR4410CDW

$19.54

Light Bulb - 40W

★★★★★

(78)

Part #8009

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-o...Read more

Read less

$55.29

Oven Igniter - Vertical Mount Bake and Broil

★★★★★

(52)

Part #74007498

This broil igniter assembly comes with its own metallic mounting bracket and a 7-inch-long dual wire lead with a plastic plug. This part will need to be repaired if your oven element is giving off no heat or very little, or is not heating evenly. You may also notice a smell of gas. The ignitor may still be glowing, but could still have gone bad.

$29.47

Top Burner Igniter

★★★★★

(22)

Part #74004053

This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, element does not heat, or gas igniter glows but does not light, replacing the igniter can solve these issues. For this installation, you will nee...Read more

Read less

$23.60

Leveler Foot Screw (Nylon)

★★★★★

(7)

Part #W11665456

This is a leveling leg for your oven, range, or stove. The leveling legs on your oven allow your appliance to sit perfectly flat. The new one may be longer in length than your original, but will work the same. Install the new leveling leg, and test if you have it adjusted properly by putting the appliance on four legs. Adjust in or out a...Read more

Read less

$59.47

Sealed Burner Cap with Electrode

★★★★★

(8)

Part #WP3412D024-26

This burner cap assembly is sold with the spark electrode igniter and has a 7-inch outer diameter. This manufacturer-approved surface burner is for gas ranges. The surface burner supplies the heat to a cooking area on the cooktop. You may need to replace your burner cap if the gas igniter glows but will ignite the flame, the range will no...Read more

Read less

$21.45

Screw

★★★★★

(6)

Part #W11233072

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

$53.20

Door Seal

★★★★★

(8)

Part #WP7212P043-60

This door seal is used for ranges and ovens. The seal prevents hot air escaping from the oven to maintain a certain temperature when baking. The clips sticking out of the seal help secure it to the range doors for the most effective performance. This seal is black in color and is made of rubber. If your oven is not heating evenly, has lit...Read more

Read less

$78.59

Burner Orifice Fitting Assembly

★★★★★

(1)

Part #WP5187M026-60

This orifice fitting assembly is sixteen inches long and is made entirely of metal.

$21.45

Thermostat Knob

★★★★★

(5)

Part #WP74002444

This thermostat knob is two inches in diameter. It is made of plastic, and will accept a 'D' shaped shaft. This white knob has gray lettering along the perimeter denoting the temperature level as well as the off, broil, and warm positions.

$8.55

Range Anti-Tip Bracket

★★★★★

(1)

Part #WP3801F656-51

Sold individually.

$8.55

Stand Mixer Screw

★★★★★

(1)

Part #WP4159193

This screw is sold individually.

Burner Grate - Gray

Part #WP7518P465-60

This grate is used for gas range/cooktop. Grate is sold individually. This is the grate that sits over the burner for your pots and pans to rest on while cooking.

Questions And Answers for PGR4410CDW

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Shane - For model number PGR4410CDW

September 15, 2022

No spark at any burner, oven won’t ignite either .. gas and power are present . Also, digital display is only partially showing

Hello Shane, thank you for your inquiry. The gas igniter PS2085070 wire is loose, broken, shorted, damaged: If there is no spark at all and if the appliance has power, the problem may be a loose or disconnected wire between the control module and the igniter, or a wire PS11744325 that has shorted. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

$55.29

Oven Igniter - Vertical Mount Bake and Broil

$44.23

HARNESS- S

Was this helpful?

Common Symptoms of the PGR4410CDW

How this model fails, and the parts that fix it.

Gas igniter glows, but will not light

Fixed by
these parts

Little to no heat when baking

Fixed by
these parts

Show All

Element will not heat

Oven not heating evenly

Fixed by
these parts

Show All

Little to no heat when broiling

Videos related to models starting with PGR4410CDW

Watch our pros, then fix it yourself.

Replacing the Light Bulb - 40W

Replacing the Top Burner Igniter

Replacing the Sealed Burner Cap with Electrode

Replacing the Leveler Foot Screw (Nylon)

Replacing the Door Seal

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven wouldn’t heat up properly

249 of 284 people found this instruction helpful.

James from Berwick, ME
Really Easy
15 - 30 mins
Screw drivers

My oven has two igniters so I needed to determine which one was the problem.

Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My ... Read more

Read less

Was this helpful?

A burner wouldn't spark strongly enough to light the gas.

168 of 188 people found this instruction helpful.

Matthew from Brookfield, MA
Really Easy
Less than 15 mins
Pliers

Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the ... Read more

Read less

Was this helpful?

gas burner ignitor failure

142 of 162 people found this instruction helpful.

roy from East Providence, RI
Easy
15 - 30 mins
Screw drivers

Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed t ... Read more

Read less

Was this helpful?