Models
>
PGP990SEN1SS
PGP990SEN1SS General Electric Cooktop - Overview
Sections of the PGP990SEN1SS
[Viewing 1 of 1]Manuals & Care Guides for PGP990SEN1SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
Knob
PartSelect #: PS2339729
Manufacturer #: WB03X10316
This burner knob is a manufacturer-approved replacement part for your stove. It is chrome in color. Having a working knob allows you to correctly dictate the stovetop temperature. This is a very easy ...
$52.39
In Stock
Spark Module - (4+0)
PartSelect #: PS952864
Manufacturer #: WB13T10046
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$63.33
In Stock
Cooktop Burner Igniter
PartSelect #: PS1021988
Manufacturer #: WB02X11175
The burner igniter creates the spark that ignites the burner. Replace if the ceramic insulator is cracked or broken.
No Longer Available
4 - Burner Ignition Switch Harness
PartSelect #: PS1019312
Manufacturer #: WB24X10143
$301.35
In Stock
PAN AERATION Stainless Steel
PartSelect #: PS1021877
Manufacturer #: WB32X10068
$174.64
Special Order
Questions And Answers for PGP990SEN1SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
June 4, 2022
When I try to light either of the 2 burners on the left, it starts clicking(igniting) on the top right burner.
So I have to use a lighter to light the left 2 burners. It hasn’t always done this.
For model number PGP990SEN1SS
Hello Chris, Thank you for your inquiry. We have researched the model number that you have provided and it could be an issue with the igniter or the spark module assembly. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the PGP990SEN1SS
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Spark module was not working correctly
I unscrewed the burners which was three screws per burner then removed gas control knobs and pulled up range top and un hooked the old module and replaced it with the new one two screws hold it in place and connected it the same way the old one was and put range back together and now it works perfect and saved me over $250.00 and part onl
... Read more
y coated around $40 with shipping great parts seller and I highly recommend partselect.com very easy fix thanks
Read less
Parts Used:
-
VINCENT from CYPRESS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sparking at 2 different burners all by themselves
-
paul from las vegas, NV
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
right front burner would not spark,
Unplug the the electrical plug from outlet, removed the stainless steel top cover by removing 8 screws with a Philips screw driver, removed the old 4-burner ignition switch harness and replace with the new harness, then reconnect wires to the spark modulator. It was very straight foreword. The problem was remedied.
( I will no ... Read more te that in problem solving). The two components had to be ruled out for the burner to fail was either the spark modulator under the cooktop or the 4- burner ignition switch harness witch is located under the cover where the knobs are. The switches are one unit and if one goes out you replace all four. It requires no tools they slip out and snap back in the stem of the knob once the cover is removed.
( I will no ... Read more te that in problem solving). The two components had to be ruled out for the burner to fail was either the spark modulator under the cooktop or the 4- burner ignition switch harness witch is located under the cover where the knobs are. The switches are one unit and if one goes out you replace all four. It requires no tools they slip out and snap back in the stem of the knob once the cover is removed.
Read less
Parts Used:
-
Daniel from REXFORD, MT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!