PGP7036SL4SS General Electric Cooktop - Overview

This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding...Read more, which reduces the risk of accidents or spills. These small components can easily fall and become lost while cleaning or wear down over time. Inspect each of the feet and ensure that you order the correct amount for your range. Each burner grate foot is sold separately.

This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.

This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and r...Read moreeplace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.

This is a knob designed for use with cooktop burners. This knob is used to control the heat setting of the corresponding burner on the cooktop. If your current control knob is missing, visually damaged, or simply not adjusting the temperature of its burner properly, it needs to be replaced. Featuring a stainless-steel finish, this knob is...Read more easily replaceable, as the old one simply needs to be pulled off its shaft, and the new one pushed on to install. This knob is an OEM part that is sold individually, so it does not come with any other parts or accessories.

Proper burner performance depends on a cap that matches the burner head and lies completely flat. Cracks, damaged mounting feet, or heavy buildup can cause poor ignition and an uneven flame. Inspect the burner head, ports, and igniter before ordering a replacement. Match the caps size, shape, and color to the full appliance model and burn...Read moreer location. Allow every surface to cool before lifting the old cap, do not force the replacement into place, and confirm that the flame burns evenly after installation.

Irregular flames or poor ignition can result from damage or buildup in the surface burner base. The base supports the burner cap, routes gas to the flame ports, and helps keep the flame pattern balanced. First remove loose debris, make sure the cap sits flat, and check the igniter for cracks or misalignment. Match the replacement to the r...Read moreanges full model number, burner size, and position. Shut off both gas and electrical power before removal. Reassemble without bending the igniter or changing any gas components, then verify that the flame is even and mostly blue.

This medium gas surface burner provides steady, even heat for everyday cooking tasks such as sautéing, simmering, and boiling. Made from durable, high-heat-resistant materials, it restores proper flame output when the original burner becomes worn, uneven, or fails to light. Designed to match the appliance’s original fit, it installs easil...Read morey by removing the old burner and placing the new one in position, helping your cooktop perform reliably again.

This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and wait until it cools before beginning this repair.