EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

PFQ83HSLW0WW General Electric Air Conditioner - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
SPONGE – Part Number: WH01X35719
$13.36
On Order
SPONGE
★★★★★
★★★★★
(1)
Part #WH01X35719
Keep your washer-dryer combo running smoothly with this reusable foam lint filter. It traps more lint to improve airflow, prevent clogs, and help your appliance dry clothes efficiently. Washable and built to last, this filter is an easy, eco-friendly alternative to single-use options. If your old filter is worn or clogged, swapping it out is quick and simple—just remove the old one and slide the new filter into place.
DRAIN PUMP & FILTER – Part Number: WH11X39237
$86.43
In Stock
DRAIN PUMP & FILTER
★★★★★
★★★★★
(1)
Part #WH11X39237
This drain pump and filter assembly is a genuine OEM replacement assembly that is designed for washing machines. It is responsible for removing water from the washing machine tub at the end of each wash cycle and trapping any debris or foreign objects like lint, hair, and coins that may clog the drainage system. Signs of a fault in the drain pump and filter assembly include the washer not draining properly, leaving water in the drum at the end of the cycle; unusual noises during the drain cycle, such as grinding or humming sounds; and visible leaks or drips around the pump or filter area.
DOOR LOCK – Part Number: WH01X29528
$62.51
In Stock
DOOR LOCK
Part #WH01X29528
This genuine OEM door lock is a replacement part specially designed for front-load washing machines. It is a safety mechanism designed to prevent the door from being opened during the wash cycle. When the door is closed, the lock engages automatically, securing the door shut until the cycle is complete and it is safe to open. This ensures that water and detergent do not spill out of the washer and cause injury. Over time, the door lock may fail due to physical damage or normal wear and tear. If the door lock is faulty, you may encounter issues such as the door not locking properly, leading to the washer not starting or stopping mid-cycle. You may also notice excessive noise and shaking while the washer is running.
FILTER – Part Number: WH01X35685
$52.17
Special Order
FILTER
★★★★★
★★★★★
(1)
Part #WH01X35685
This lint filter assembly is designed to capture lint and fine debris generated during the washer/dryer cycle, helping maintain optimal airflow and appliance performance. Its durable construction ensures reliable filtration, reducing drying times and preventing potential vent clogs. Regular cleaning is essential to maintain efficiency, as a clogged or damaged filter can lead to longer drying cycles and reduced airflow. Installation is straightforward, and the filter is easily accessible for routine maintenance. Signs that replacement may be necessary include extended drying times, visible damage, or fault codes such as F353 or a “Lint Filter Clogged” alert in the SmartHQ app. Replacing a worn filter helps preserve air quality, improve energy efficiency, and extend the life of your appliance.
DOOR LATCH – Part Number: WH01X32580
$16.07
In Stock
DOOR LATCH
Part #WH01X32580
Keep your washer running smoothly with this genuine door latch. It helps keep the door securely closed during cycles, preventing leaks and making sure everything works as it should. Made for select GE, Hotpoint, Haier, Monogram, and Café models—just check your model before ordering.
LEVELING LEG – Part Number: WH01X29505
$22.93
On Order
LEVELING LEG
Part #WH01X29505
This leveling leg is designed to stabilize the appliance by allowing precise height adjustment on uneven floors. Proper leveling helps reduce vibration, noise, and door alignment issues, making this an essential replacement when the original leg is bent, broken, or missing.
SUSPENSION DAMPER – Part Number: WH03X29516
$37.20
In Stock
SUSPENSION DAMPER
★★★★★
★★★★★
(1)
Part #WH03X29516
This suspension damper helps stabilize the appliance by absorbing movement and vibration during operation. It supports smooth performance and helps reduce noise or excessive motion. Replacing a worn damper restores proper balance and protects internal components from strain.
BOOT GASKET CLAMP – Part Number: WH05X29663
$17.27
In Stock
BOOT GASKET CLAMP
Part #WH05X29663
This clamp secures the boot gasket in place, ensuring a tight seal between connected components. Proper fastening helps prevent leaks and maintains alignment during operation. Replacing a loose or damaged clamp restores secure sealing and reliable performance.
ACCELEROMETER W/INSTRUCTIONS – Part Number: WH03X37841
$62.76
In Stock
ACCELEROMETER W/INSTRUCTIONS
Part #WH03X37841
BELT – Part Number: WH03X29522
$56.36
In Stock
TUB TO PUMP HOSE – Part Number: WH41X29628
$27.50
In Stock
TUB TO PUMP HOSE
Part #WH41X29628
This hose is a replacement fluid-transfer component designed to move water from the tub to the pump. It is commonly replaced to resolve leaks, drainage issues, or blockages and helps restore proper water flow.
INNER GASKET CLAMP – Part Number: WH01X29615
$19.51
In Stock
INNER GASKET CLAMP
Part #WH01X29615

Common Symptoms of the PFQ83HSLW0WW

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No spin, no drain
7 of 15 people found this instruction helpful.
  • Peter from CLAYTON, NC
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
Disassemble according to instructions then remove pump...my only issue was I ordered the pump and paid $11.95 for t
2 to 3 days shipping. I didn't get the part until the following Saturday which was like 6 to 7 days...horrible delivery
Was this helpful?
Thank you for voting!
Pump Replacement
4 of 6 people found this instruction helpful.
  • Cheston O from Clayton, NC
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
The first thing to get is a baking sheet/pan and a bucket. You'll want to get it as close to the drain as possible. Be ready for ALOT of water to be in there. Ease it out and dump the water into the bucket until it's all out. Next you'll have to prop up the front of the machine at least 4 or 5 inches. You'll need pliers to loosen the hos e clamp. There's only 4 screws so it's pretty easy, but you'll only be able to see the 2 in front. The other 2 you'll have to feel your way thru it.
Was this helpful?
Thank you for voting!
Washer running but not draining
4 of 6 people found this instruction helpful.
  • Peter from Seattle, WA
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Followed YouTube instructions to lay the machine on its back, for easier access to the pipes and drain pump from the exposed bottom of the machine. Cleared the pipes first of a slight clog in the filter, turned the machine upright again, but it still did not drain. Laid the machine on its back again, after ordering a new drain pump, and f itted the new pump. Again, it did not work, but left the new pump in and ordered a new control board. Fitting a new control board involves detaching the control panel and cabinet top, which is not hard, then extracting the old control board. Taking off the wiring clips turned out to be significantly more difficult than re-connecting them when the new control board arrived. Fitting a new control board can easily be done with the machine upright. This time the draining did work, yay, and the washer is now fully functional again.
Was this helpful?
Thank you for voting!